SUBROUTINE SLARRD( RANGE, ORDER, N, VL, VU, IL, IU, GERS,
$ RELTOL, D, E, E2, PIVMIN, NSPLIT, ISPLIT,
$ M, W, WERR, WL, WU, IBLOCK, INDEXW,
$ WORK, IWORK, INFO )
*
* -- LAPACK auxiliary routine (version 3.1) --
* Univ. of Tennessee, Univ. of California Berkeley and NAG Ltd..
* November 2006
*
* .. Scalar Arguments ..
CHARACTER ORDER, RANGE
INTEGER IL, INFO, IU, M, N, NSPLIT
REAL PIVMIN, RELTOL, VL, VU, WL, WU
* ..
* .. Array Arguments ..
INTEGER IBLOCK( * ), INDEXW( * ),
$ ISPLIT( * ), IWORK( * )
REAL D( * ), E( * ), E2( * ),
$ GERS( * ), W( * ), WERR( * ), WORK( * )
* ..
*
* Purpose
* =======
*
* SLARRD computes the eigenvalues of a symmetric tridiagonal
* matrix T to suitable accuracy. This is an auxiliary code to be
* called from SSTEMR.
* The user may ask for all eigenvalues, all eigenvalues
* in the half-open interval (VL, VU], or the IL-th through IU-th
* eigenvalues.
*
* To avoid overflow, the matrix must be scaled so that its
* largest element is no greater than overflow**(1/2) *
* underflow**(1/4) in absolute value, and for greatest
* accuracy, it should not be much smaller than that.
*
* See W. Kahan "Accurate Eigenvalues of a Symmetric Tridiagonal
* Matrix", Report CS41, Computer Science Dept., Stanford
* University, July 21, 1966.
*
* Arguments
* =========
*
* RANGE (input) CHARACTER
* = 'A': ("All") all eigenvalues will be found.
* = 'V': ("Value") all eigenvalues in the half-open interval
* (VL, VU] will be found.
* = 'I': ("Index") the IL-th through IU-th eigenvalues (of the
* entire matrix) will be found.
*
* ORDER (input) CHARACTER
* = 'B': ("By Block") the eigenvalues will be grouped by
* split-off block (see IBLOCK, ISPLIT) and
* ordered from smallest to largest within
* the block.
* = 'E': ("Entire matrix")
* the eigenvalues for the entire matrix
* will be ordered from smallest to
* largest.
*
* N (input) INTEGER
* The order of the tridiagonal matrix T. N >= 0.
*
* VL (input) REAL
* VU (input) REAL
* If RANGE='V', the lower and upper bounds of the interval to
* be searched for eigenvalues. Eigenvalues less than or equal
* to VL, or greater than VU, will not be returned. VL < VU.
* Not referenced if RANGE = 'A' or 'I'.
*
* IL (input) INTEGER
* IU (input) INTEGER
* If RANGE='I', the indices (in ascending order) of the
* smallest and largest eigenvalues to be returned.
* 1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0.
* Not referenced if RANGE = 'A' or 'V'.
*
* GERS (input) REAL array, dimension (2*N)
* The N Gerschgorin intervals (the i-th Gerschgorin interval
* is (GERS(2*i-1), GERS(2*i)).
*
* RELTOL (input) REAL
* The minimum relative width of an interval. When an interval
* is narrower than RELTOL times the larger (in
* magnitude) endpoint, then it is considered to be
* sufficiently small, i.e., converged. Note: this should
* always be at least radix*machine epsilon.
*
* D (input) REAL array, dimension (N)
* The n diagonal elements of the tridiagonal matrix T.
*
* E (input) REAL array, dimension (N-1)
* The (n-1) off-diagonal elements of the tridiagonal matrix T.
*
* E2 (input) REAL array, dimension (N-1)
* The (n-1) squared off-diagonal elements of the tridiagonal matrix T.
*
* PIVMIN (input) REAL
* The minimum pivot allowed in the Sturm sequence for T.
*
* NSPLIT (input) INTEGER
* The number of diagonal blocks in the matrix T.
* 1 <= NSPLIT <= N.
*
* ISPLIT (input) INTEGER array, dimension (N)
* The splitting points, at which T breaks up into submatrices.
* The first submatrix consists of rows/columns 1 to ISPLIT(1),
* the second of rows/columns ISPLIT(1)+1 through ISPLIT(2),
* etc., and the NSPLIT-th consists of rows/columns
* ISPLIT(NSPLIT-1)+1 through ISPLIT(NSPLIT)=N.
* (Only the first NSPLIT elements will actually be used, but
* since the user cannot know a priori what value NSPLIT will
* have, N words must be reserved for ISPLIT.)
*
* M (output) INTEGER
* The actual number of eigenvalues found. 0 <= M <= N.
* (See also the description of INFO=2,3.)
*
* W (output) REAL array, dimension (N)
* On exit, the first M elements of W will contain the
* eigenvalue approximations. SLARRD computes an interval
* I_j = (a_j, b_j] that includes eigenvalue j. The eigenvalue
* approximation is given as the interval midpoint
* W(j)= ( a_j + b_j)/2. The corresponding error is bounded by
* WERR(j) = abs( a_j - b_j)/2
*
* WERR (output) REAL array, dimension (N)
* The error bound on the corresponding eigenvalue approximation
* in W.
*
* WL (output) REAL
* WU (output) REAL
* The interval (WL, WU] contains all the wanted eigenvalues.
* If RANGE='V', then WL=VL and WU=VU.
* If RANGE='A', then WL and WU are the global Gerschgorin bounds
* on the spectrum.
* If RANGE='I', then WL and WU are computed by SLAEBZ from the
* index range specified.
*
* IBLOCK (output) INTEGER array, dimension (N)
* At each row/column j where E(j) is zero or small, the
* matrix T is considered to split into a block diagonal
* matrix. On exit, if INFO = 0, IBLOCK(i) specifies to which
* block (from 1 to the number of blocks) the eigenvalue W(i)
* belongs. (SLARRD may use the remaining N-M elements as
* workspace.)
*
* INDEXW (output) INTEGER array, dimension (N)
* The indices of the eigenvalues within each block (submatrix);
* for example, INDEXW(i)= j and IBLOCK(i)=k imply that the
* i-th eigenvalue W(i) is the j-th eigenvalue in block k.
*
* WORK (workspace) REAL array, dimension (4*N)
*
* IWORK (workspace) INTEGER array, dimension (3*N)
*
* INFO (output) INTEGER
* = 0: successful exit
* < 0: if INFO = -i, the i-th argument had an illegal value
* > 0: some or all of the eigenvalues failed to converge or
* were not computed:
* =1 or 3: Bisection failed to converge for some
* eigenvalues; these eigenvalues are flagged by a
* negative block number. The effect is that the
* eigenvalues may not be as accurate as the
* absolute and relative tolerances. This is
* generally caused by unexpectedly inaccurate
* arithmetic.
* =2 or 3: RANGE='I' only: Not all of the eigenvalues
* IL:IU were found.
* Effect: M < IU+1-IL
* Cause: non-monotonic arithmetic, causing the
* Sturm sequence to be non-monotonic.
* Cure: recalculate, using RANGE='A', and pick
* out eigenvalues IL:IU. In some cases,
* increasing the PARAMETER "FUDGE" may
* make things work.
* = 4: RANGE='I', and the Gershgorin interval
* initially used was too small. No eigenvalues
* were computed.
* Probable cause: your machine has sloppy
* floating-point arithmetic.
* Cure: Increase the PARAMETER "FUDGE",
* recompile, and try again.
*
* Internal Parameters
* ===================
*
* FUDGE REAL , default = 2
* A "fudge factor" to widen the Gershgorin intervals. Ideally,
* a value of 1 should work, but on machines with sloppy
* arithmetic, this needs to be larger. The default for
* publicly released versions should be large enough to handle
* the worst machine around. Note that this has no effect
* on accuracy of the solution.
*
* Based on contributions by
* W. Kahan, University of California, Berkeley, USA
* Beresford Parlett, University of California, Berkeley, USA
* Jim Demmel, University of California, Berkeley, USA
* Inderjit Dhillon, University of Texas, Austin, USA
* Osni Marques, LBNL/NERSC, USA
* Christof Voemel, University of California, Berkeley, USA
*
* =====================================================================
*
* .. Parameters ..
REAL ZERO, ONE, TWO, HALF, FUDGE
PARAMETER ( ZERO = 0.0E0, ONE = 1.0E0,
$ TWO = 2.0E0, HALF = ONE/TWO,
$ FUDGE = TWO )
INTEGER ALLRNG, VALRNG, INDRNG
PARAMETER ( ALLRNG = 1, VALRNG = 2, INDRNG = 3 )
* ..
* .. Local Scalars ..
LOGICAL NCNVRG, TOOFEW
INTEGER I, IB, IBEGIN, IDISCL, IDISCU, IE, IEND, IINFO,
$ IM, IN, IOFF, IOUT, IRANGE, ITMAX, ITMP1,
$ ITMP2, IW, IWOFF, J, JBLK, JDISC, JE, JEE, NB,
$ NWL, NWU
REAL ATOLI, EPS, GL, GU, RTOLI, SPDIAM, TMP1, TMP2,
$ TNORM, UFLOW, WKILL, WLU, WUL
* ..
* .. Local Arrays ..
INTEGER IDUMMA( 1 )
* ..
* .. External Functions ..
LOGICAL LSAME
INTEGER ILAENV
REAL SLAMCH
EXTERNAL LSAME, ILAENV, SLAMCH
* ..
* .. External Subroutines ..
EXTERNAL SLAEBZ
* ..
* .. Intrinsic Functions ..
INTRINSIC ABS, INT, LOG, MAX, MIN
* ..
* .. Executable Statements ..
*
INFO = 0
*
* Decode RANGE
*
IF( LSAME( RANGE, 'A' ) ) THEN
IRANGE = ALLRNG
ELSE IF( LSAME( RANGE, 'V' ) ) THEN
IRANGE = VALRNG
ELSE IF( LSAME( RANGE, 'I' ) ) THEN
IRANGE = INDRNG
ELSE
IRANGE = 0
END IF
*
* Check for Errors
*
IF( IRANGE.LE.0 ) THEN
INFO = -1
ELSE IF( .NOT.(LSAME(ORDER,'B').OR.LSAME(ORDER,'E')) ) THEN
INFO = -2
ELSE IF( N.LT.0 ) THEN
INFO = -3
ELSE IF( IRANGE.EQ.VALRNG ) THEN
IF( VL.GE.VU )
$ INFO = -5
ELSE IF( IRANGE.EQ.INDRNG .AND.
$ ( IL.LT.1 .OR. IL.GT.MAX( 1, N ) ) ) THEN
INFO = -6
ELSE IF( IRANGE.EQ.INDRNG .AND.
$ ( IU.LT.MIN( N, IL ) .OR. IU.GT.N ) ) THEN
INFO = -7
END IF
*
IF( INFO.NE.0 ) THEN
RETURN
END IF
* Initialize error flags
INFO = 0
NCNVRG = .FALSE.
TOOFEW = .FALSE.
* Quick return if possible
M = 0
IF( N.EQ.0 ) RETURN
* Simplification:
IF( IRANGE.EQ.INDRNG .AND. IL.EQ.1 .AND. IU.EQ.N ) IRANGE = 1
* Get machine constants
EPS = SLAMCH( 'P' )
UFLOW = SLAMCH( 'U' )
* Special Case when N=1
* Treat case of 1x1 matrix for quick return
IF( N.EQ.1 ) THEN
IF( (IRANGE.EQ.ALLRNG).OR.
$ ((IRANGE.EQ.VALRNG).AND.(D(1).GT.VL).AND.(D(1).LE.VU)).OR.
$ ((IRANGE.EQ.INDRNG).AND.(IL.EQ.1).AND.(IU.EQ.1)) ) THEN
M = 1
W(1) = D(1)
* The computation error of the eigenvalue is zero
WERR(1) = ZERO
IBLOCK( 1 ) = 1
INDEXW( 1 ) = 1
ENDIF
RETURN
END IF
* NB is the minimum vector length for vector bisection, or 0
* if only scalar is to be done.
NB = ILAENV( 1, 'SSTEBZ', ' ', N, -1, -1, -1 )
IF( NB.LE.1 ) NB = 0
* Find global spectral radius
GL = D(1)
GU = D(1)
DO 5 I = 1,N
GL = MIN( GL, GERS( 2*I - 1))
GU = MAX( GU, GERS(2*I) )
5 CONTINUE
* Compute global Gerschgorin bounds and spectral diameter
TNORM = MAX( ABS( GL ), ABS( GU ) )
GL = GL - FUDGE*TNORM*EPS*N - FUDGE*TWO*PIVMIN
GU = GU + FUDGE*TNORM*EPS*N + FUDGE*TWO*PIVMIN
SPDIAM = GU - GL
* Input arguments for SLAEBZ:
* The relative tolerance. An interval (a,b] lies within
* "relative tolerance" if b-a < RELTOL*max(|a|,|b|),
RTOLI = RELTOL
* Set the absolute tolerance for interval convergence to zero to force
* interval convergence based on relative size of the interval.
* This is dangerous because intervals might not converge when RELTOL is
* small. But at least a very small number should be selected so that for
* strongly graded matrices, the code can get relatively accurate
* eigenvalues.
ATOLI = FUDGE*TWO*UFLOW + FUDGE*TWO*PIVMIN
IF( IRANGE.EQ.INDRNG ) THEN
* RANGE='I': Compute an interval containing eigenvalues
* IL through IU. The initial interval [GL,GU] from the global
* Gerschgorin bounds GL and GU is refined by SLAEBZ.
ITMAX = INT( ( LOG( TNORM+PIVMIN )-LOG( PIVMIN ) ) /
$ LOG( TWO ) ) + 2
WORK( N+1 ) = GL
WORK( N+2 ) = GL
WORK( N+3 ) = GU
WORK( N+4 ) = GU
WORK( N+5 ) = GL
WORK( N+6 ) = GU
IWORK( 1 ) = -1
IWORK( 2 ) = -1
IWORK( 3 ) = N + 1
IWORK( 4 ) = N + 1
IWORK( 5 ) = IL - 1
IWORK( 6 ) = IU
*
CALL SLAEBZ( 3, ITMAX, N, 2, 2, NB, ATOLI, RTOLI, PIVMIN,
$ D, E, E2, IWORK( 5 ), WORK( N+1 ), WORK( N+5 ), IOUT,
$ IWORK, W, IBLOCK, IINFO )
IF( IINFO .NE. 0 ) THEN
INFO = IINFO
RETURN
END IF
* On exit, output intervals may not be ordered by ascending negcount
IF( IWORK( 6 ).EQ.IU ) THEN
WL = WORK( N+1 )
WLU = WORK( N+3 )
NWL = IWORK( 1 )
WU = WORK( N+4 )
WUL = WORK( N+2 )
NWU = IWORK( 4 )
ELSE
WL = WORK( N+2 )
WLU = WORK( N+4 )
NWL = IWORK( 2 )
WU = WORK( N+3 )
WUL = WORK( N+1 )
NWU = IWORK( 3 )
END IF
* On exit, the interval [WL, WLU] contains a value with negcount NWL,
* and [WUL, WU] contains a value with negcount NWU.
IF( NWL.LT.0 .OR. NWL.GE.N .OR. NWU.LT.1 .OR. NWU.GT.N ) THEN
INFO = 4
RETURN
END IF
ELSEIF( IRANGE.EQ.VALRNG ) THEN
WL = VL
WU = VU
ELSEIF( IRANGE.EQ.ALLRNG ) THEN
WL = GL
WU = GU
ENDIF
* Find Eigenvalues -- Loop Over blocks and recompute NWL and NWU.
* NWL accumulates the number of eigenvalues .le. WL,
* NWU accumulates the number of eigenvalues .le. WU
M = 0
IEND = 0
INFO = 0
NWL = 0
NWU = 0
*
DO 70 JBLK = 1, NSPLIT
IOFF = IEND
IBEGIN = IOFF + 1
IEND = ISPLIT( JBLK )
IN = IEND - IOFF
*
IF( IN.EQ.1 ) THEN
* 1x1 block
IF( WL.GE.D( IBEGIN )-PIVMIN )
$ NWL = NWL + 1
IF( WU.GE.D( IBEGIN )-PIVMIN )
$ NWU = NWU + 1
IF( IRANGE.EQ.ALLRNG .OR.
$ ( WL.LT.D( IBEGIN )-PIVMIN
$ .AND. WU.GE. D( IBEGIN )-PIVMIN ) ) THEN
M = M + 1
W( M ) = D( IBEGIN )
WERR(M) = ZERO
* The gap for a single block doesn't matter for the later
* algorithm and is assigned an arbitrary large value
IBLOCK( M ) = JBLK
INDEXW( M ) = 1
END IF
* Disabled 2x2 case because of a failure on the following matrix
* RANGE = 'I', IL = IU = 4
* Original Tridiagonal, d = [
* -0.150102010615740E+00
* -0.849897989384260E+00
* -0.128208148052635E-15
* 0.128257718286320E-15
* ];
* e = [
* -0.357171383266986E+00
* -0.180411241501588E-15
* -0.175152352710251E-15
* ];
*
* ELSE IF( IN.EQ.2 ) THEN
** 2x2 block
* DISC = SQRT( (HALF*(D(IBEGIN)-D(IEND)))**2 + E(IBEGIN)**2 )
* TMP1 = HALF*(D(IBEGIN)+D(IEND))
* L1 = TMP1 - DISC
* IF( WL.GE. L1-PIVMIN )
* $ NWL = NWL + 1
* IF( WU.GE. L1-PIVMIN )
* $ NWU = NWU + 1
* IF( IRANGE.EQ.ALLRNG .OR. ( WL.LT.L1-PIVMIN .AND. WU.GE.
* $ L1-PIVMIN ) ) THEN
* M = M + 1
* W( M ) = L1
** The uncertainty of eigenvalues of a 2x2 matrix is very small
* WERR( M ) = EPS * ABS( W( M ) ) * TWO
* IBLOCK( M ) = JBLK
* INDEXW( M ) = 1
* ENDIF
* L2 = TMP1 + DISC
* IF( WL.GE. L2-PIVMIN )
* $ NWL = NWL + 1
* IF( WU.GE. L2-PIVMIN )
* $ NWU = NWU + 1
* IF( IRANGE.EQ.ALLRNG .OR. ( WL.LT.L2-PIVMIN .AND. WU.GE.
* $ L2-PIVMIN ) ) THEN
* M = M + 1
* W( M ) = L2
** The uncertainty of eigenvalues of a 2x2 matrix is very small
* WERR( M ) = EPS * ABS( W( M ) ) * TWO
* IBLOCK( M ) = JBLK
* INDEXW( M ) = 2
* ENDIF
ELSE
* General Case - block of size IN >= 2
* Compute local Gerschgorin interval and use it as the initial
* interval for SLAEBZ
GU = D( IBEGIN )
GL = D( IBEGIN )
TMP1 = ZERO
DO 40 J = IBEGIN, IEND
GL = MIN( GL, GERS( 2*J - 1))
GU = MAX( GU, GERS(2*J) )
40 CONTINUE
SPDIAM = GU - GL
GL = GL - FUDGE*SPDIAM*EPS*IN - FUDGE*PIVMIN
GU = GU + FUDGE*SPDIAM*EPS*IN + FUDGE*PIVMIN
*
IF( IRANGE.GT.1 ) THEN
IF( GU.LT.WL ) THEN
* the local block contains none of the wanted eigenvalues
NWL = NWL + IN
NWU = NWU + IN
GO TO 70
END IF
* refine search interval if possible, only range (WL,WU] matters
GL = MAX( GL, WL )
GU = MIN( GU, WU )
IF( GL.GE.GU )
$ GO TO 70
END IF
* Find negcount of initial interval boundaries GL and GU
WORK( N+1 ) = GL
WORK( N+IN+1 ) = GU
CALL SLAEBZ( 1, 0, IN, IN, 1, NB, ATOLI, RTOLI, PIVMIN,
$ D( IBEGIN ), E( IBEGIN ), E2( IBEGIN ),
$ IDUMMA, WORK( N+1 ), WORK( N+2*IN+1 ), IM,
$ IWORK, W( M+1 ), IBLOCK( M+1 ), IINFO )
IF( IINFO .NE. 0 ) THEN
INFO = IINFO
RETURN
END IF
*
NWL = NWL + IWORK( 1 )
NWU = NWU + IWORK( IN+1 )
IWOFF = M - IWORK( 1 )
* Compute Eigenvalues
ITMAX = INT( ( LOG( GU-GL+PIVMIN )-LOG( PIVMIN ) ) /
$ LOG( TWO ) ) + 2
CALL SLAEBZ( 2, ITMAX, IN, IN, 1, NB, ATOLI, RTOLI, PIVMIN,
$ D( IBEGIN ), E( IBEGIN ), E2( IBEGIN ),
$ IDUMMA, WORK( N+1 ), WORK( N+2*IN+1 ), IOUT,
$ IWORK, W( M+1 ), IBLOCK( M+1 ), IINFO )
IF( IINFO .NE. 0 ) THEN
INFO = IINFO
RETURN
END IF
*
* Copy eigenvalues into W and IBLOCK
* Use -JBLK for block number for unconverged eigenvalues.
* Loop over the number of output intervals from SLAEBZ
DO 60 J = 1, IOUT
* eigenvalue approximation is middle point of interval
TMP1 = HALF*( WORK( J+N )+WORK( J+IN+N ) )
* semi length of error interval
TMP2 = HALF*ABS( WORK( J+N )-WORK( J+IN+N ) )
IF( J.GT.IOUT-IINFO ) THEN
* Flag non-convergence.
NCNVRG = .TRUE.
IB = -JBLK
ELSE
IB = JBLK
END IF
DO 50 JE = IWORK( J ) + 1 + IWOFF,
$ IWORK( J+IN ) + IWOFF
W( JE ) = TMP1
WERR( JE ) = TMP2
INDEXW( JE ) = JE - IWOFF
IBLOCK( JE ) = IB
50 CONTINUE
60 CONTINUE
*
M = M + IM
END IF
70 CONTINUE
* If RANGE='I', then (WL,WU) contains eigenvalues NWL+1,...,NWU
* If NWL+1 < IL or NWU > IU, discard extra eigenvalues.
IF( IRANGE.EQ.INDRNG ) THEN
IDISCL = IL - 1 - NWL
IDISCU = NWU - IU
*
IF( IDISCL.GT.0 ) THEN
IM = 0
DO 80 JE = 1, M
* Remove some of the smallest eigenvalues from the left so that
* at the end IDISCL =0. Move all eigenvalues up to the left.
IF( W( JE ).LE.WLU .AND. IDISCL.GT.0 ) THEN
IDISCL = IDISCL - 1
ELSE
IM = IM + 1
W( IM ) = W( JE )
WERR( IM ) = WERR( JE )
INDEXW( IM ) = INDEXW( JE )
IBLOCK( IM ) = IBLOCK( JE )
END IF
80 CONTINUE
M = IM
END IF
IF( IDISCU.GT.0 ) THEN
* Remove some of the largest eigenvalues from the right so that
* at the end IDISCU =0. Move all eigenvalues up to the left.
IM=M+1
DO 81 JE = M, 1, -1
IF( W( JE ).GE.WUL .AND. IDISCU.GT.0 ) THEN
IDISCU = IDISCU - 1
ELSE
IM = IM - 1
W( IM ) = W( JE )
WERR( IM ) = WERR( JE )
INDEXW( IM ) = INDEXW( JE )
IBLOCK( IM ) = IBLOCK( JE )
END IF
81 CONTINUE
JEE = 0
DO 82 JE = IM, M
JEE = JEE + 1
W( JEE ) = W( JE )
WERR( JEE ) = WERR( JE )
INDEXW( JEE ) = INDEXW( JE )
IBLOCK( JEE ) = IBLOCK( JE )
82 CONTINUE
M = M-IM+1
END IF
IF( IDISCL.GT.0 .OR. IDISCU.GT.0 ) THEN
* Code to deal with effects of bad arithmetic. (If N(w) is
* monotone non-decreasing, this should never happen.)
* Some low eigenvalues to be discarded are not in (WL,WLU],
* or high eigenvalues to be discarded are not in (WUL,WU]
* so just kill off the smallest IDISCL/largest IDISCU
* eigenvalues, by marking the corresponding IBLOCK = 0
IF( IDISCL.GT.0 ) THEN
WKILL = WU
DO 100 JDISC = 1, IDISCL
IW = 0
DO 90 JE = 1, M
IF( IBLOCK( JE ).NE.0 .AND.
$ ( W( JE ).LT.WKILL .OR. IW.EQ.0 ) ) THEN
IW = JE
WKILL = W( JE )
END IF
90 CONTINUE
IBLOCK( IW ) = 0
100 CONTINUE
END IF
IF( IDISCU.GT.0 ) THEN
WKILL = WL
DO 120 JDISC = 1, IDISCU
IW = 0
DO 110 JE = 1, M
IF( IBLOCK( JE ).NE.0 .AND.
$ ( W( JE ).GE.WKILL .OR. IW.EQ.0 ) ) THEN
IW = JE
WKILL = W( JE )
END IF
110 CONTINUE
IBLOCK( IW ) = 0
120 CONTINUE
END IF
* Now erase all eigenvalues with IBLOCK set to zero
IM = 0
DO 130 JE = 1, M
IF( IBLOCK( JE ).NE.0 ) THEN
IM = IM + 1
W( IM ) = W( JE )
WERR( IM ) = WERR( JE )
INDEXW( IM ) = INDEXW( JE )
IBLOCK( IM ) = IBLOCK( JE )
END IF
130 CONTINUE
M = IM
END IF
IF( IDISCL.LT.0 .OR. IDISCU.LT.0 ) THEN
TOOFEW = .TRUE.
END IF
END IF
*
IF(( IRANGE.EQ.ALLRNG .AND. M.NE.N ).OR.
$ ( IRANGE.EQ.INDRNG .AND. M.NE.IU-IL+1 ) ) THEN
TOOFEW = .TRUE.
END IF
* If ORDER='B', do nothing the eigenvalues are already sorted by
* block.
* If ORDER='E', sort the eigenvalues from smallest to largest
IF( LSAME(ORDER,'E') .AND. NSPLIT.GT.1 ) THEN
DO 150 JE = 1, M - 1
IE = 0
TMP1 = W( JE )
DO 140 J = JE + 1, M
IF( W( J ).LT.TMP1 ) THEN
IE = J
TMP1 = W( J )
END IF
140 CONTINUE
IF( IE.NE.0 ) THEN
TMP2 = WERR( IE )
ITMP1 = IBLOCK( IE )
ITMP2 = INDEXW( IE )
W( IE ) = W( JE )
WERR( IE ) = WERR( JE )
IBLOCK( IE ) = IBLOCK( JE )
INDEXW( IE ) = INDEXW( JE )
W( JE ) = TMP1
WERR( JE ) = TMP2
IBLOCK( JE ) = ITMP1
INDEXW( JE ) = ITMP2
END IF
150 CONTINUE
END IF
*
INFO = 0
IF( NCNVRG )
$ INFO = INFO + 1
IF( TOOFEW )
$ INFO = INFO + 2
RETURN
*
* End of SLARRD
*
END