LAPACK  3.6.1
LAPACK: Linear Algebra PACKage
subroutine cgeevx ( character  BALANC,
character  JOBVL,
character  JOBVR,
character  SENSE,
integer  N,
complex, dimension( lda, * )  A,
integer  LDA,
complex, dimension( * )  W,
complex, dimension( ldvl, * )  VL,
integer  LDVL,
complex, dimension( ldvr, * )  VR,
integer  LDVR,
integer  ILO,
integer  IHI,
real, dimension( * )  SCALE,
real  ABNRM,
real, dimension( * )  RCONDE,
real, dimension( * )  RCONDV,
complex, dimension( * )  WORK,
integer  LWORK,
real, dimension( * )  RWORK,
integer  INFO 
)

CGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices

Download CGEEVX + dependencies [TGZ] [ZIP] [TXT]

Purpose:
 CGEEVX computes for an N-by-N complex nonsymmetric matrix A, the
 eigenvalues and, optionally, the left and/or right eigenvectors.

 Optionally also, it computes a balancing transformation to improve
 the conditioning of the eigenvalues and eigenvectors (ILO, IHI,
 SCALE, and ABNRM), reciprocal condition numbers for the eigenvalues
 (RCONDE), and reciprocal condition numbers for the right
 eigenvectors (RCONDV).

 The right eigenvector v(j) of A satisfies
                  A * v(j) = lambda(j) * v(j)
 where lambda(j) is its eigenvalue.
 The left eigenvector u(j) of A satisfies
               u(j)**H * A = lambda(j) * u(j)**H
 where u(j)**H denotes the conjugate transpose of u(j).

 The computed eigenvectors are normalized to have Euclidean norm
 equal to 1 and largest component real.

 Balancing a matrix means permuting the rows and columns to make it
 more nearly upper triangular, and applying a diagonal similarity
 transformation D * A * D**(-1), where D is a diagonal matrix, to
 make its rows and columns closer in norm and the condition numbers
 of its eigenvalues and eigenvectors smaller.  The computed
 reciprocal condition numbers correspond to the balanced matrix.
 Permuting rows and columns will not change the condition numbers
 (in exact arithmetic) but diagonal scaling will.  For further
 explanation of balancing, see section 4.10.2 of the LAPACK
 Users' Guide.
Parameters
[in]BALANC
          BALANC is CHARACTER*1
          Indicates how the input matrix should be diagonally scaled
          and/or permuted to improve the conditioning of its
          eigenvalues.
          = 'N': Do not diagonally scale or permute;
          = 'P': Perform permutations to make the matrix more nearly
                 upper triangular. Do not diagonally scale;
          = 'S': Diagonally scale the matrix, ie. replace A by
                 D*A*D**(-1), where D is a diagonal matrix chosen
                 to make the rows and columns of A more equal in
                 norm. Do not permute;
          = 'B': Both diagonally scale and permute A.

          Computed reciprocal condition numbers will be for the matrix
          after balancing and/or permuting. Permuting does not change
          condition numbers (in exact arithmetic), but balancing does.
[in]JOBVL
          JOBVL is CHARACTER*1
          = 'N': left eigenvectors of A are not computed;
          = 'V': left eigenvectors of A are computed.
          If SENSE = 'E' or 'B', JOBVL must = 'V'.
[in]JOBVR
          JOBVR is CHARACTER*1
          = 'N': right eigenvectors of A are not computed;
          = 'V': right eigenvectors of A are computed.
          If SENSE = 'E' or 'B', JOBVR must = 'V'.
[in]SENSE
          SENSE is CHARACTER*1
          Determines which reciprocal condition numbers are computed.
          = 'N': None are computed;
          = 'E': Computed for eigenvalues only;
          = 'V': Computed for right eigenvectors only;
          = 'B': Computed for eigenvalues and right eigenvectors.

          If SENSE = 'E' or 'B', both left and right eigenvectors
          must also be computed (JOBVL = 'V' and JOBVR = 'V').
[in]N
          N is INTEGER
          The order of the matrix A. N >= 0.
[in,out]A
          A is COMPLEX array, dimension (LDA,N)
          On entry, the N-by-N matrix A.
          On exit, A has been overwritten.  If JOBVL = 'V' or
          JOBVR = 'V', A contains the Schur form of the balanced
          version of the matrix A.
[in]LDA
          LDA is INTEGER
          The leading dimension of the array A.  LDA >= max(1,N).
[out]W
          W is COMPLEX array, dimension (N)
          W contains the computed eigenvalues.
[out]VL
          VL is COMPLEX array, dimension (LDVL,N)
          If JOBVL = 'V', the left eigenvectors u(j) are stored one
          after another in the columns of VL, in the same order
          as their eigenvalues.
          If JOBVL = 'N', VL is not referenced.
          u(j) = VL(:,j), the j-th column of VL.
[in]LDVL
          LDVL is INTEGER
          The leading dimension of the array VL.  LDVL >= 1; if
          JOBVL = 'V', LDVL >= N.
[out]VR
          VR is COMPLEX array, dimension (LDVR,N)
          If JOBVR = 'V', the right eigenvectors v(j) are stored one
          after another in the columns of VR, in the same order
          as their eigenvalues.
          If JOBVR = 'N', VR is not referenced.
          v(j) = VR(:,j), the j-th column of VR.
[in]LDVR
          LDVR is INTEGER
          The leading dimension of the array VR.  LDVR >= 1; if
          JOBVR = 'V', LDVR >= N.
[out]ILO
          ILO is INTEGER
[out]IHI
          IHI is INTEGER
          ILO and IHI are integer values determined when A was
          balanced.  The balanced A(i,j) = 0 if I > J and
          J = 1,...,ILO-1 or I = IHI+1,...,N.
[out]SCALE
          SCALE is REAL array, dimension (N)
          Details of the permutations and scaling factors applied
          when balancing A.  If P(j) is the index of the row and column
          interchanged with row and column j, and D(j) is the scaling
          factor applied to row and column j, then
          SCALE(J) = P(J),    for J = 1,...,ILO-1
                   = D(J),    for J = ILO,...,IHI
                   = P(J)     for J = IHI+1,...,N.
          The order in which the interchanges are made is N to IHI+1,
          then 1 to ILO-1.
[out]ABNRM
          ABNRM is REAL
          The one-norm of the balanced matrix (the maximum
          of the sum of absolute values of elements of any column).
[out]RCONDE
          RCONDE is REAL array, dimension (N)
          RCONDE(j) is the reciprocal condition number of the j-th
          eigenvalue.
[out]RCONDV
          RCONDV is REAL array, dimension (N)
          RCONDV(j) is the reciprocal condition number of the j-th
          right eigenvector.
[out]WORK
          WORK is COMPLEX array, dimension (MAX(1,LWORK))
          On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
[in]LWORK
          LWORK is INTEGER
          The dimension of the array WORK.  If SENSE = 'N' or 'E',
          LWORK >= max(1,2*N), and if SENSE = 'V' or 'B',
          LWORK >= N*N+2*N.
          For good performance, LWORK must generally be larger.

          If LWORK = -1, then a workspace query is assumed; the routine
          only calculates the optimal size of the WORK array, returns
          this value as the first entry of the WORK array, and no error
          message related to LWORK is issued by XERBLA.
[out]RWORK
          RWORK is REAL array, dimension (2*N)
[out]INFO
          INFO is INTEGER
          = 0:  successful exit
          < 0:  if INFO = -i, the i-th argument had an illegal value.
          > 0:  if INFO = i, the QR algorithm failed to compute all the
                eigenvalues, and no eigenvectors or condition numbers
                have been computed; elements 1:ILO-1 and i+1:N of W
                contain eigenvalues which have converged.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date
June 2016

Definition at line 289 of file cgeevx.f.

289  implicit none
290 *
291 * -- LAPACK driver routine (version 3.6.1) --
292 * -- LAPACK is a software package provided by Univ. of Tennessee, --
293 * -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
294 * June 2016
295 *
296 * .. Scalar Arguments ..
297  CHARACTER balanc, jobvl, jobvr, sense
298  INTEGER ihi, ilo, info, lda, ldvl, ldvr, lwork, n
299  REAL abnrm
300 * ..
301 * .. Array Arguments ..
302  REAL rconde( * ), rcondv( * ), rwork( * ),
303  $ scale( * )
304  COMPLEX a( lda, * ), vl( ldvl, * ), vr( ldvr, * ),
305  $ w( * ), work( * )
306 * ..
307 *
308 * =====================================================================
309 *
310 * .. Parameters ..
311  REAL zero, one
312  parameter ( zero = 0.0e0, one = 1.0e0 )
313 * ..
314 * .. Local Scalars ..
315  LOGICAL lquery, scalea, wantvl, wantvr, wntsnb, wntsne,
316  $ wntsnn, wntsnv
317  CHARACTER job, side
318  INTEGER hswork, i, icond, ierr, itau, iwrk, k,
319  $ lwork_trevc, maxwrk, minwrk, nout
320  REAL anrm, bignum, cscale, eps, scl, smlnum
321  COMPLEX tmp
322 * ..
323 * .. Local Arrays ..
324  LOGICAL select( 1 )
325  REAL dum( 1 )
326 * ..
327 * .. External Subroutines ..
328  EXTERNAL slabad, slascl, xerbla, csscal, cgebak, cgebal,
330  $ ctrsna, cunghr
331 * ..
332 * .. External Functions ..
333  LOGICAL lsame
334  INTEGER isamax, ilaenv
335  REAL slamch, scnrm2, clange
336  EXTERNAL lsame, isamax, ilaenv, slamch, scnrm2, clange
337 * ..
338 * .. Intrinsic Functions ..
339  INTRINSIC REAL, cmplx, conjg, aimag, max, sqrt
340 * ..
341 * .. Executable Statements ..
342 *
343 * Test the input arguments
344 *
345  info = 0
346  lquery = ( lwork.EQ.-1 )
347  wantvl = lsame( jobvl, 'V' )
348  wantvr = lsame( jobvr, 'V' )
349  wntsnn = lsame( sense, 'N' )
350  wntsne = lsame( sense, 'E' )
351  wntsnv = lsame( sense, 'V' )
352  wntsnb = lsame( sense, 'B' )
353  IF( .NOT.( lsame( balanc, 'N' ) .OR. lsame( balanc, 'S' ) .OR.
354  $ lsame( balanc, 'P' ) .OR. lsame( balanc, 'B' ) ) ) THEN
355  info = -1
356  ELSE IF( ( .NOT.wantvl ) .AND. ( .NOT.lsame( jobvl, 'N' ) ) ) THEN
357  info = -2
358  ELSE IF( ( .NOT.wantvr ) .AND. ( .NOT.lsame( jobvr, 'N' ) ) ) THEN
359  info = -3
360  ELSE IF( .NOT.( wntsnn .OR. wntsne .OR. wntsnb .OR. wntsnv ) .OR.
361  $ ( ( wntsne .OR. wntsnb ) .AND. .NOT.( wantvl .AND.
362  $ wantvr ) ) ) THEN
363  info = -4
364  ELSE IF( n.LT.0 ) THEN
365  info = -5
366  ELSE IF( lda.LT.max( 1, n ) ) THEN
367  info = -7
368  ELSE IF( ldvl.LT.1 .OR. ( wantvl .AND. ldvl.LT.n ) ) THEN
369  info = -10
370  ELSE IF( ldvr.LT.1 .OR. ( wantvr .AND. ldvr.LT.n ) ) THEN
371  info = -12
372  END IF
373 *
374 * Compute workspace
375 * (Note: Comments in the code beginning "Workspace:" describe the
376 * minimal amount of workspace needed at that point in the code,
377 * as well as the preferred amount for good performance.
378 * CWorkspace refers to complex workspace, and RWorkspace to real
379 * workspace. NB refers to the optimal block size for the
380 * immediately following subroutine, as returned by ILAENV.
381 * HSWORK refers to the workspace preferred by CHSEQR, as
382 * calculated below. HSWORK is computed assuming ILO=1 and IHI=N,
383 * the worst case.)
384 *
385  IF( info.EQ.0 ) THEN
386  IF( n.EQ.0 ) THEN
387  minwrk = 1
388  maxwrk = 1
389  ELSE
390  maxwrk = n + n*ilaenv( 1, 'CGEHRD', ' ', n, 1, n, 0 )
391 *
392  IF( wantvl ) THEN
393  CALL ctrevc3( 'L', 'B', SELECT, n, a, lda,
394  $ vl, ldvl, vr, ldvr,
395  $ n, nout, work, -1, rwork, -1, ierr )
396  lwork_trevc = int( work(1) )
397  maxwrk = max( maxwrk, lwork_trevc )
398  CALL chseqr( 'S', 'V', n, 1, n, a, lda, w, vl, ldvl,
399  $ work, -1, info )
400  ELSE IF( wantvr ) THEN
401  CALL ctrevc3( 'R', 'B', SELECT, n, a, lda,
402  $ vl, ldvl, vr, ldvr,
403  $ n, nout, work, -1, rwork, -1, ierr )
404  lwork_trevc = int( work(1) )
405  maxwrk = max( maxwrk, lwork_trevc )
406  CALL chseqr( 'S', 'V', n, 1, n, a, lda, w, vr, ldvr,
407  $ work, -1, info )
408  ELSE
409  IF( wntsnn ) THEN
410  CALL chseqr( 'E', 'N', n, 1, n, a, lda, w, vr, ldvr,
411  $ work, -1, info )
412  ELSE
413  CALL chseqr( 'S', 'N', n, 1, n, a, lda, w, vr, ldvr,
414  $ work, -1, info )
415  END IF
416  END IF
417  hswork = int( work(1) )
418 *
419  IF( ( .NOT.wantvl ) .AND. ( .NOT.wantvr ) ) THEN
420  minwrk = 2*n
421  IF( .NOT.( wntsnn .OR. wntsne ) )
422  $ minwrk = max( minwrk, n*n + 2*n )
423  maxwrk = max( maxwrk, hswork )
424  IF( .NOT.( wntsnn .OR. wntsne ) )
425  $ maxwrk = max( maxwrk, n*n + 2*n )
426  ELSE
427  minwrk = 2*n
428  IF( .NOT.( wntsnn .OR. wntsne ) )
429  $ minwrk = max( minwrk, n*n + 2*n )
430  maxwrk = max( maxwrk, hswork )
431  maxwrk = max( maxwrk, n + ( n - 1 )*ilaenv( 1, 'CUNGHR',
432  $ ' ', n, 1, n, -1 ) )
433  IF( .NOT.( wntsnn .OR. wntsne ) )
434  $ maxwrk = max( maxwrk, n*n + 2*n )
435  maxwrk = max( maxwrk, 2*n )
436  END IF
437  maxwrk = max( maxwrk, minwrk )
438  END IF
439  work( 1 ) = maxwrk
440 *
441  IF( lwork.LT.minwrk .AND. .NOT.lquery ) THEN
442  info = -20
443  END IF
444  END IF
445 *
446  IF( info.NE.0 ) THEN
447  CALL xerbla( 'CGEEVX', -info )
448  RETURN
449  ELSE IF( lquery ) THEN
450  RETURN
451  END IF
452 *
453 * Quick return if possible
454 *
455  IF( n.EQ.0 )
456  $ RETURN
457 *
458 * Get machine constants
459 *
460  eps = slamch( 'P' )
461  smlnum = slamch( 'S' )
462  bignum = one / smlnum
463  CALL slabad( smlnum, bignum )
464  smlnum = sqrt( smlnum ) / eps
465  bignum = one / smlnum
466 *
467 * Scale A if max element outside range [SMLNUM,BIGNUM]
468 *
469  icond = 0
470  anrm = clange( 'M', n, n, a, lda, dum )
471  scalea = .false.
472  IF( anrm.GT.zero .AND. anrm.LT.smlnum ) THEN
473  scalea = .true.
474  cscale = smlnum
475  ELSE IF( anrm.GT.bignum ) THEN
476  scalea = .true.
477  cscale = bignum
478  END IF
479  IF( scalea )
480  $ CALL clascl( 'G', 0, 0, anrm, cscale, n, n, a, lda, ierr )
481 *
482 * Balance the matrix and compute ABNRM
483 *
484  CALL cgebal( balanc, n, a, lda, ilo, ihi, scale, ierr )
485  abnrm = clange( '1', n, n, a, lda, dum )
486  IF( scalea ) THEN
487  dum( 1 ) = abnrm
488  CALL slascl( 'G', 0, 0, cscale, anrm, 1, 1, dum, 1, ierr )
489  abnrm = dum( 1 )
490  END IF
491 *
492 * Reduce to upper Hessenberg form
493 * (CWorkspace: need 2*N, prefer N+N*NB)
494 * (RWorkspace: none)
495 *
496  itau = 1
497  iwrk = itau + n
498  CALL cgehrd( n, ilo, ihi, a, lda, work( itau ), work( iwrk ),
499  $ lwork-iwrk+1, ierr )
500 *
501  IF( wantvl ) THEN
502 *
503 * Want left eigenvectors
504 * Copy Householder vectors to VL
505 *
506  side = 'L'
507  CALL clacpy( 'L', n, n, a, lda, vl, ldvl )
508 *
509 * Generate unitary matrix in VL
510 * (CWorkspace: need 2*N-1, prefer N+(N-1)*NB)
511 * (RWorkspace: none)
512 *
513  CALL cunghr( n, ilo, ihi, vl, ldvl, work( itau ), work( iwrk ),
514  $ lwork-iwrk+1, ierr )
515 *
516 * Perform QR iteration, accumulating Schur vectors in VL
517 * (CWorkspace: need 1, prefer HSWORK (see comments) )
518 * (RWorkspace: none)
519 *
520  iwrk = itau
521  CALL chseqr( 'S', 'V', n, ilo, ihi, a, lda, w, vl, ldvl,
522  $ work( iwrk ), lwork-iwrk+1, info )
523 *
524  IF( wantvr ) THEN
525 *
526 * Want left and right eigenvectors
527 * Copy Schur vectors to VR
528 *
529  side = 'B'
530  CALL clacpy( 'F', n, n, vl, ldvl, vr, ldvr )
531  END IF
532 *
533  ELSE IF( wantvr ) THEN
534 *
535 * Want right eigenvectors
536 * Copy Householder vectors to VR
537 *
538  side = 'R'
539  CALL clacpy( 'L', n, n, a, lda, vr, ldvr )
540 *
541 * Generate unitary matrix in VR
542 * (CWorkspace: need 2*N-1, prefer N+(N-1)*NB)
543 * (RWorkspace: none)
544 *
545  CALL cunghr( n, ilo, ihi, vr, ldvr, work( itau ), work( iwrk ),
546  $ lwork-iwrk+1, ierr )
547 *
548 * Perform QR iteration, accumulating Schur vectors in VR
549 * (CWorkspace: need 1, prefer HSWORK (see comments) )
550 * (RWorkspace: none)
551 *
552  iwrk = itau
553  CALL chseqr( 'S', 'V', n, ilo, ihi, a, lda, w, vr, ldvr,
554  $ work( iwrk ), lwork-iwrk+1, info )
555 *
556  ELSE
557 *
558 * Compute eigenvalues only
559 * If condition numbers desired, compute Schur form
560 *
561  IF( wntsnn ) THEN
562  job = 'E'
563  ELSE
564  job = 'S'
565  END IF
566 *
567 * (CWorkspace: need 1, prefer HSWORK (see comments) )
568 * (RWorkspace: none)
569 *
570  iwrk = itau
571  CALL chseqr( job, 'N', n, ilo, ihi, a, lda, w, vr, ldvr,
572  $ work( iwrk ), lwork-iwrk+1, info )
573  END IF
574 *
575 * If INFO .NE. 0 from CHSEQR, then quit
576 *
577  IF( info.NE.0 )
578  $ GO TO 50
579 *
580  IF( wantvl .OR. wantvr ) THEN
581 *
582 * Compute left and/or right eigenvectors
583 * (CWorkspace: need 2*N, prefer N + 2*N*NB)
584 * (RWorkspace: need N)
585 *
586  CALL ctrevc3( side, 'B', SELECT, n, a, lda, vl, ldvl, vr, ldvr,
587  $ n, nout, work( iwrk ), lwork-iwrk+1,
588  $ rwork, n, ierr )
589  END IF
590 *
591 * Compute condition numbers if desired
592 * (CWorkspace: need N*N+2*N unless SENSE = 'E')
593 * (RWorkspace: need 2*N unless SENSE = 'E')
594 *
595  IF( .NOT.wntsnn ) THEN
596  CALL ctrsna( sense, 'A', SELECT, n, a, lda, vl, ldvl, vr, ldvr,
597  $ rconde, rcondv, n, nout, work( iwrk ), n, rwork,
598  $ icond )
599  END IF
600 *
601  IF( wantvl ) THEN
602 *
603 * Undo balancing of left eigenvectors
604 *
605  CALL cgebak( balanc, 'L', n, ilo, ihi, scale, n, vl, ldvl,
606  $ ierr )
607 *
608 * Normalize left eigenvectors and make largest component real
609 *
610  DO 20 i = 1, n
611  scl = one / scnrm2( n, vl( 1, i ), 1 )
612  CALL csscal( n, scl, vl( 1, i ), 1 )
613  DO 10 k = 1, n
614  rwork( k ) = REAL( VL( K, I ) )**2 +
615  $ aimag( vl( k, i ) )**2
616  10 CONTINUE
617  k = isamax( n, rwork, 1 )
618  tmp = conjg( vl( k, i ) ) / sqrt( rwork( k ) )
619  CALL cscal( n, tmp, vl( 1, i ), 1 )
620  vl( k, i ) = cmplx( REAL( VL( K, I ) ), zero )
621  20 CONTINUE
622  END IF
623 *
624  IF( wantvr ) THEN
625 *
626 * Undo balancing of right eigenvectors
627 *
628  CALL cgebak( balanc, 'R', n, ilo, ihi, scale, n, vr, ldvr,
629  $ ierr )
630 *
631 * Normalize right eigenvectors and make largest component real
632 *
633  DO 40 i = 1, n
634  scl = one / scnrm2( n, vr( 1, i ), 1 )
635  CALL csscal( n, scl, vr( 1, i ), 1 )
636  DO 30 k = 1, n
637  rwork( k ) = REAL( VR( K, I ) )**2 +
638  $ aimag( vr( k, i ) )**2
639  30 CONTINUE
640  k = isamax( n, rwork, 1 )
641  tmp = conjg( vr( k, i ) ) / sqrt( rwork( k ) )
642  CALL cscal( n, tmp, vr( 1, i ), 1 )
643  vr( k, i ) = cmplx( REAL( VR( K, I ) ), zero )
644  40 CONTINUE
645  END IF
646 *
647 * Undo scaling if necessary
648 *
649  50 CONTINUE
650  IF( scalea ) THEN
651  CALL clascl( 'G', 0, 0, cscale, anrm, n-info, 1, w( info+1 ),
652  $ max( n-info, 1 ), ierr )
653  IF( info.EQ.0 ) THEN
654  IF( ( wntsnv .OR. wntsnb ) .AND. icond.EQ.0 )
655  $ CALL slascl( 'G', 0, 0, cscale, anrm, n, 1, rcondv, n,
656  $ ierr )
657  ELSE
658  CALL clascl( 'G', 0, 0, cscale, anrm, ilo-1, 1, w, n, ierr )
659  END IF
660  END IF
661 *
662  work( 1 ) = maxwrk
663  RETURN
664 *
665 * End of CGEEVX
666 *
real function scnrm2(N, X, INCX)
SCNRM2
Definition: scnrm2.f:56
subroutine cunghr(N, ILO, IHI, A, LDA, TAU, WORK, LWORK, INFO)
CUNGHR
Definition: cunghr.f:128
subroutine cgebak(JOB, SIDE, N, ILO, IHI, SCALE, M, V, LDV, INFO)
CGEBAK
Definition: cgebak.f:133
integer function isamax(N, SX, INCX)
ISAMAX
Definition: isamax.f:53
subroutine clascl(TYPE, KL, KU, CFROM, CTO, M, N, A, LDA, INFO)
CLASCL multiplies a general rectangular matrix by a real scalar defined as cto/cfrom.
Definition: clascl.f:145
subroutine slascl(TYPE, KL, KU, CFROM, CTO, M, N, A, LDA, INFO)
SLASCL multiplies a general rectangular matrix by a real scalar defined as cto/cfrom.
Definition: slascl.f:145
subroutine slabad(SMALL, LARGE)
SLABAD
Definition: slabad.f:76
subroutine ctrsna(JOB, HOWMNY, SELECT, N, T, LDT, VL, LDVL, VR, LDVR, S, SEP, MM, M, WORK, LDWORK, RWORK, INFO)
CTRSNA
Definition: ctrsna.f:251
real function clange(NORM, M, N, A, LDA, WORK)
CLANGE returns the value of the 1-norm, Frobenius norm, infinity-norm, or the largest absolute value ...
Definition: clange.f:117
subroutine xerbla(SRNAME, INFO)
XERBLA
Definition: xerbla.f:62
subroutine cscal(N, CA, CX, INCX)
CSCAL
Definition: cscal.f:54
subroutine chseqr(JOB, COMPZ, N, ILO, IHI, H, LDH, W, Z, LDZ, WORK, LWORK, INFO)
CHSEQR
Definition: chseqr.f:301
subroutine ctrevc3(SIDE, HOWMNY, SELECT, N, T, LDT, VL, LDVL, VR, LDVR, MM, M, WORK, LWORK, RWORK, LRWORK, INFO)
CTREVC3
Definition: ctrevc3.f:248
subroutine cgebal(JOB, N, A, LDA, ILO, IHI, SCALE, INFO)
CGEBAL
Definition: cgebal.f:163
subroutine clacpy(UPLO, M, N, A, LDA, B, LDB)
CLACPY copies all or part of one two-dimensional array to another.
Definition: clacpy.f:105
integer function ilaenv(ISPEC, NAME, OPTS, N1, N2, N3, N4)
Definition: tstiee.f:83
real function slamch(CMACH)
SLAMCH
Definition: slamch.f:69
subroutine cgehrd(N, ILO, IHI, A, LDA, TAU, WORK, LWORK, INFO)
CGEHRD
Definition: cgehrd.f:169
logical function lsame(CA, CB)
LSAME
Definition: lsame.f:55
subroutine csscal(N, SA, CX, INCX)
CSSCAL
Definition: csscal.f:54

Here is the call graph for this function:

Here is the caller graph for this function: