LAPACK  3.6.1
LAPACK: Linear Algebra PACKage
subroutine dgees ( character  JOBVS,
character  SORT,
external  SELECT,
integer  N,
double precision, dimension( lda, * )  A,
integer  LDA,
integer  SDIM,
double precision, dimension( * )  WR,
double precision, dimension( * )  WI,
double precision, dimension( ldvs, * )  VS,
integer  LDVS,
double precision, dimension( * )  WORK,
integer  LWORK,
logical, dimension( * )  BWORK,
integer  INFO 
)

DGEES computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices

Download DGEES + dependencies [TGZ] [ZIP] [TXT]

Purpose:
 DGEES computes for an N-by-N real nonsymmetric matrix A, the
 eigenvalues, the real Schur form T, and, optionally, the matrix of
 Schur vectors Z.  This gives the Schur factorization A = Z*T*(Z**T).

 Optionally, it also orders the eigenvalues on the diagonal of the
 real Schur form so that selected eigenvalues are at the top left.
 The leading columns of Z then form an orthonormal basis for the
 invariant subspace corresponding to the selected eigenvalues.

 A matrix is in real Schur form if it is upper quasi-triangular with
 1-by-1 and 2-by-2 blocks. 2-by-2 blocks will be standardized in the
 form
         [  a  b  ]
         [  c  a  ]

 where b*c < 0. The eigenvalues of such a block are a +- sqrt(bc).
Parameters
[in]JOBVS
          JOBVS is CHARACTER*1
          = 'N': Schur vectors are not computed;
          = 'V': Schur vectors are computed.
[in]SORT
          SORT is CHARACTER*1
          Specifies whether or not to order the eigenvalues on the
          diagonal of the Schur form.
          = 'N': Eigenvalues are not ordered;
          = 'S': Eigenvalues are ordered (see SELECT).
[in]SELECT
          SELECT is a LOGICAL FUNCTION of two DOUBLE PRECISION arguments
          SELECT must be declared EXTERNAL in the calling subroutine.
          If SORT = 'S', SELECT is used to select eigenvalues to sort
          to the top left of the Schur form.
          If SORT = 'N', SELECT is not referenced.
          An eigenvalue WR(j)+sqrt(-1)*WI(j) is selected if
          SELECT(WR(j),WI(j)) is true; i.e., if either one of a complex
          conjugate pair of eigenvalues is selected, then both complex
          eigenvalues are selected.
          Note that a selected complex eigenvalue may no longer
          satisfy SELECT(WR(j),WI(j)) = .TRUE. after ordering, since
          ordering may change the value of complex eigenvalues
          (especially if the eigenvalue is ill-conditioned); in this
          case INFO is set to N+2 (see INFO below).
[in]N
          N is INTEGER
          The order of the matrix A. N >= 0.
[in,out]A
          A is DOUBLE PRECISION array, dimension (LDA,N)
          On entry, the N-by-N matrix A.
          On exit, A has been overwritten by its real Schur form T.
[in]LDA
          LDA is INTEGER
          The leading dimension of the array A.  LDA >= max(1,N).
[out]SDIM
          SDIM is INTEGER
          If SORT = 'N', SDIM = 0.
          If SORT = 'S', SDIM = number of eigenvalues (after sorting)
                         for which SELECT is true. (Complex conjugate
                         pairs for which SELECT is true for either
                         eigenvalue count as 2.)
[out]WR
          WR is DOUBLE PRECISION array, dimension (N)
[out]WI
          WI is DOUBLE PRECISION array, dimension (N)
          WR and WI contain the real and imaginary parts,
          respectively, of the computed eigenvalues in the same order
          that they appear on the diagonal of the output Schur form T.
          Complex conjugate pairs of eigenvalues will appear
          consecutively with the eigenvalue having the positive
          imaginary part first.
[out]VS
          VS is DOUBLE PRECISION array, dimension (LDVS,N)
          If JOBVS = 'V', VS contains the orthogonal matrix Z of Schur
          vectors.
          If JOBVS = 'N', VS is not referenced.
[in]LDVS
          LDVS is INTEGER
          The leading dimension of the array VS.  LDVS >= 1; if
          JOBVS = 'V', LDVS >= N.
[out]WORK
          WORK is DOUBLE PRECISION array, dimension (MAX(1,LWORK))
          On exit, if INFO = 0, WORK(1) contains the optimal LWORK.
[in]LWORK
          LWORK is INTEGER
          The dimension of the array WORK.  LWORK >= max(1,3*N).
          For good performance, LWORK must generally be larger.

          If LWORK = -1, then a workspace query is assumed; the routine
          only calculates the optimal size of the WORK array, returns
          this value as the first entry of the WORK array, and no error
          message related to LWORK is issued by XERBLA.
[out]BWORK
          BWORK is LOGICAL array, dimension (N)
          Not referenced if SORT = 'N'.
[out]INFO
          INFO is INTEGER
          = 0: successful exit
          < 0: if INFO = -i, the i-th argument had an illegal value.
          > 0: if INFO = i, and i is
             <= N: the QR algorithm failed to compute all the
                   eigenvalues; elements 1:ILO-1 and i+1:N of WR and WI
                   contain those eigenvalues which have converged; if
                   JOBVS = 'V', VS contains the matrix which reduces A
                   to its partially converged Schur form.
             = N+1: the eigenvalues could not be reordered because some
                   eigenvalues were too close to separate (the problem
                   is very ill-conditioned);
             = N+2: after reordering, roundoff changed values of some
                   complex eigenvalues so that leading eigenvalues in
                   the Schur form no longer satisfy SELECT=.TRUE.  This
                   could also be caused by underflow due to scaling.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date
November 2011

Definition at line 218 of file dgees.f.

218 *
219 * -- LAPACK driver routine (version 3.4.0) --
220 * -- LAPACK is a software package provided by Univ. of Tennessee, --
221 * -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
222 * November 2011
223 *
224 * .. Scalar Arguments ..
225  CHARACTER jobvs, sort
226  INTEGER info, lda, ldvs, lwork, n, sdim
227 * ..
228 * .. Array Arguments ..
229  LOGICAL bwork( * )
230  DOUBLE PRECISION a( lda, * ), vs( ldvs, * ), wi( * ), work( * ),
231  $ wr( * )
232 * ..
233 * .. Function Arguments ..
234  LOGICAL select
235  EXTERNAL SELECT
236 * ..
237 *
238 * =====================================================================
239 *
240 * .. Parameters ..
241  DOUBLE PRECISION zero, one
242  parameter ( zero = 0.0d0, one = 1.0d0 )
243 * ..
244 * .. Local Scalars ..
245  LOGICAL cursl, lastsl, lquery, lst2sl, scalea, wantst,
246  $ wantvs
247  INTEGER hswork, i, i1, i2, ibal, icond, ierr, ieval,
248  $ ihi, ilo, inxt, ip, itau, iwrk, maxwrk, minwrk
249  DOUBLE PRECISION anrm, bignum, cscale, eps, s, sep, smlnum
250 * ..
251 * .. Local Arrays ..
252  INTEGER idum( 1 )
253  DOUBLE PRECISION dum( 1 )
254 * ..
255 * .. External Subroutines ..
256  EXTERNAL dcopy, dgebak, dgebal, dgehrd, dhseqr, dlacpy,
258 * ..
259 * .. External Functions ..
260  LOGICAL lsame
261  INTEGER ilaenv
262  DOUBLE PRECISION dlamch, dlange
263  EXTERNAL lsame, ilaenv, dlamch, dlange
264 * ..
265 * .. Intrinsic Functions ..
266  INTRINSIC max, sqrt
267 * ..
268 * .. Executable Statements ..
269 *
270 * Test the input arguments
271 *
272  info = 0
273  lquery = ( lwork.EQ.-1 )
274  wantvs = lsame( jobvs, 'V' )
275  wantst = lsame( sort, 'S' )
276  IF( ( .NOT.wantvs ) .AND. ( .NOT.lsame( jobvs, 'N' ) ) ) THEN
277  info = -1
278  ELSE IF( ( .NOT.wantst ) .AND. ( .NOT.lsame( sort, 'N' ) ) ) THEN
279  info = -2
280  ELSE IF( n.LT.0 ) THEN
281  info = -4
282  ELSE IF( lda.LT.max( 1, n ) ) THEN
283  info = -6
284  ELSE IF( ldvs.LT.1 .OR. ( wantvs .AND. ldvs.LT.n ) ) THEN
285  info = -11
286  END IF
287 *
288 * Compute workspace
289 * (Note: Comments in the code beginning "Workspace:" describe the
290 * minimal amount of workspace needed at that point in the code,
291 * as well as the preferred amount for good performance.
292 * NB refers to the optimal block size for the immediately
293 * following subroutine, as returned by ILAENV.
294 * HSWORK refers to the workspace preferred by DHSEQR, as
295 * calculated below. HSWORK is computed assuming ILO=1 and IHI=N,
296 * the worst case.)
297 *
298  IF( info.EQ.0 ) THEN
299  IF( n.EQ.0 ) THEN
300  minwrk = 1
301  maxwrk = 1
302  ELSE
303  maxwrk = 2*n + n*ilaenv( 1, 'DGEHRD', ' ', n, 1, n, 0 )
304  minwrk = 3*n
305 *
306  CALL dhseqr( 'S', jobvs, n, 1, n, a, lda, wr, wi, vs, ldvs,
307  $ work, -1, ieval )
308  hswork = work( 1 )
309 *
310  IF( .NOT.wantvs ) THEN
311  maxwrk = max( maxwrk, n + hswork )
312  ELSE
313  maxwrk = max( maxwrk, 2*n + ( n - 1 )*ilaenv( 1,
314  $ 'DORGHR', ' ', n, 1, n, -1 ) )
315  maxwrk = max( maxwrk, n + hswork )
316  END IF
317  END IF
318  work( 1 ) = maxwrk
319 *
320  IF( lwork.LT.minwrk .AND. .NOT.lquery ) THEN
321  info = -13
322  END IF
323  END IF
324 *
325  IF( info.NE.0 ) THEN
326  CALL xerbla( 'DGEES ', -info )
327  RETURN
328  ELSE IF( lquery ) THEN
329  RETURN
330  END IF
331 *
332 * Quick return if possible
333 *
334  IF( n.EQ.0 ) THEN
335  sdim = 0
336  RETURN
337  END IF
338 *
339 * Get machine constants
340 *
341  eps = dlamch( 'P' )
342  smlnum = dlamch( 'S' )
343  bignum = one / smlnum
344  CALL dlabad( smlnum, bignum )
345  smlnum = sqrt( smlnum ) / eps
346  bignum = one / smlnum
347 *
348 * Scale A if max element outside range [SMLNUM,BIGNUM]
349 *
350  anrm = dlange( 'M', n, n, a, lda, dum )
351  scalea = .false.
352  IF( anrm.GT.zero .AND. anrm.LT.smlnum ) THEN
353  scalea = .true.
354  cscale = smlnum
355  ELSE IF( anrm.GT.bignum ) THEN
356  scalea = .true.
357  cscale = bignum
358  END IF
359  IF( scalea )
360  $ CALL dlascl( 'G', 0, 0, anrm, cscale, n, n, a, lda, ierr )
361 *
362 * Permute the matrix to make it more nearly triangular
363 * (Workspace: need N)
364 *
365  ibal = 1
366  CALL dgebal( 'P', n, a, lda, ilo, ihi, work( ibal ), ierr )
367 *
368 * Reduce to upper Hessenberg form
369 * (Workspace: need 3*N, prefer 2*N+N*NB)
370 *
371  itau = n + ibal
372  iwrk = n + itau
373  CALL dgehrd( n, ilo, ihi, a, lda, work( itau ), work( iwrk ),
374  $ lwork-iwrk+1, ierr )
375 *
376  IF( wantvs ) THEN
377 *
378 * Copy Householder vectors to VS
379 *
380  CALL dlacpy( 'L', n, n, a, lda, vs, ldvs )
381 *
382 * Generate orthogonal matrix in VS
383 * (Workspace: need 3*N-1, prefer 2*N+(N-1)*NB)
384 *
385  CALL dorghr( n, ilo, ihi, vs, ldvs, work( itau ), work( iwrk ),
386  $ lwork-iwrk+1, ierr )
387  END IF
388 *
389  sdim = 0
390 *
391 * Perform QR iteration, accumulating Schur vectors in VS if desired
392 * (Workspace: need N+1, prefer N+HSWORK (see comments) )
393 *
394  iwrk = itau
395  CALL dhseqr( 'S', jobvs, n, ilo, ihi, a, lda, wr, wi, vs, ldvs,
396  $ work( iwrk ), lwork-iwrk+1, ieval )
397  IF( ieval.GT.0 )
398  $ info = ieval
399 *
400 * Sort eigenvalues if desired
401 *
402  IF( wantst .AND. info.EQ.0 ) THEN
403  IF( scalea ) THEN
404  CALL dlascl( 'G', 0, 0, cscale, anrm, n, 1, wr, n, ierr )
405  CALL dlascl( 'G', 0, 0, cscale, anrm, n, 1, wi, n, ierr )
406  END IF
407  DO 10 i = 1, n
408  bwork( i ) = SELECT( wr( i ), wi( i ) )
409  10 CONTINUE
410 *
411 * Reorder eigenvalues and transform Schur vectors
412 * (Workspace: none needed)
413 *
414  CALL dtrsen( 'N', jobvs, bwork, n, a, lda, vs, ldvs, wr, wi,
415  $ sdim, s, sep, work( iwrk ), lwork-iwrk+1, idum, 1,
416  $ icond )
417  IF( icond.GT.0 )
418  $ info = n + icond
419  END IF
420 *
421  IF( wantvs ) THEN
422 *
423 * Undo balancing
424 * (Workspace: need N)
425 *
426  CALL dgebak( 'P', 'R', n, ilo, ihi, work( ibal ), n, vs, ldvs,
427  $ ierr )
428  END IF
429 *
430  IF( scalea ) THEN
431 *
432 * Undo scaling for the Schur form of A
433 *
434  CALL dlascl( 'H', 0, 0, cscale, anrm, n, n, a, lda, ierr )
435  CALL dcopy( n, a, lda+1, wr, 1 )
436  IF( cscale.EQ.smlnum ) THEN
437 *
438 * If scaling back towards underflow, adjust WI if an
439 * offdiagonal element of a 2-by-2 block in the Schur form
440 * underflows.
441 *
442  IF( ieval.GT.0 ) THEN
443  i1 = ieval + 1
444  i2 = ihi - 1
445  CALL dlascl( 'G', 0, 0, cscale, anrm, ilo-1, 1, wi,
446  $ max( ilo-1, 1 ), ierr )
447  ELSE IF( wantst ) THEN
448  i1 = 1
449  i2 = n - 1
450  ELSE
451  i1 = ilo
452  i2 = ihi - 1
453  END IF
454  inxt = i1 - 1
455  DO 20 i = i1, i2
456  IF( i.LT.inxt )
457  $ GO TO 20
458  IF( wi( i ).EQ.zero ) THEN
459  inxt = i + 1
460  ELSE
461  IF( a( i+1, i ).EQ.zero ) THEN
462  wi( i ) = zero
463  wi( i+1 ) = zero
464  ELSE IF( a( i+1, i ).NE.zero .AND. a( i, i+1 ).EQ.
465  $ zero ) THEN
466  wi( i ) = zero
467  wi( i+1 ) = zero
468  IF( i.GT.1 )
469  $ CALL dswap( i-1, a( 1, i ), 1, a( 1, i+1 ), 1 )
470  IF( n.GT.i+1 )
471  $ CALL dswap( n-i-1, a( i, i+2 ), lda,
472  $ a( i+1, i+2 ), lda )
473  IF( wantvs ) THEN
474  CALL dswap( n, vs( 1, i ), 1, vs( 1, i+1 ), 1 )
475  END IF
476  a( i, i+1 ) = a( i+1, i )
477  a( i+1, i ) = zero
478  END IF
479  inxt = i + 2
480  END IF
481  20 CONTINUE
482  END IF
483 *
484 * Undo scaling for the imaginary part of the eigenvalues
485 *
486  CALL dlascl( 'G', 0, 0, cscale, anrm, n-ieval, 1,
487  $ wi( ieval+1 ), max( n-ieval, 1 ), ierr )
488  END IF
489 *
490  IF( wantst .AND. info.EQ.0 ) THEN
491 *
492 * Check if reordering successful
493 *
494  lastsl = .true.
495  lst2sl = .true.
496  sdim = 0
497  ip = 0
498  DO 30 i = 1, n
499  cursl = SELECT( wr( i ), wi( i ) )
500  IF( wi( i ).EQ.zero ) THEN
501  IF( cursl )
502  $ sdim = sdim + 1
503  ip = 0
504  IF( cursl .AND. .NOT.lastsl )
505  $ info = n + 2
506  ELSE
507  IF( ip.EQ.1 ) THEN
508 *
509 * Last eigenvalue of conjugate pair
510 *
511  cursl = cursl .OR. lastsl
512  lastsl = cursl
513  IF( cursl )
514  $ sdim = sdim + 2
515  ip = -1
516  IF( cursl .AND. .NOT.lst2sl )
517  $ info = n + 2
518  ELSE
519 *
520 * First eigenvalue of conjugate pair
521 *
522  ip = 1
523  END IF
524  END IF
525  lst2sl = lastsl
526  lastsl = cursl
527  30 CONTINUE
528  END IF
529 *
530  work( 1 ) = maxwrk
531  RETURN
532 *
533 * End of DGEES
534 *
subroutine dcopy(N, DX, INCX, DY, INCY)
DCOPY
Definition: dcopy.f:53
double precision function dlamch(CMACH)
DLAMCH
Definition: dlamch.f:65
subroutine dlacpy(UPLO, M, N, A, LDA, B, LDB)
DLACPY copies all or part of one two-dimensional array to another.
Definition: dlacpy.f:105
subroutine dgehrd(N, ILO, IHI, A, LDA, TAU, WORK, LWORK, INFO)
DGEHRD
Definition: dgehrd.f:169
subroutine dlascl(TYPE, KL, KU, CFROM, CTO, M, N, A, LDA, INFO)
DLASCL multiplies a general rectangular matrix by a real scalar defined as cto/cfrom.
Definition: dlascl.f:145
subroutine dgebak(JOB, SIDE, N, ILO, IHI, SCALE, M, V, LDV, INFO)
DGEBAK
Definition: dgebak.f:132
subroutine xerbla(SRNAME, INFO)
XERBLA
Definition: xerbla.f:62
subroutine dlabad(SMALL, LARGE)
DLABAD
Definition: dlabad.f:76
subroutine dswap(N, DX, INCX, DY, INCY)
DSWAP
Definition: dswap.f:53
subroutine dgebal(JOB, N, A, LDA, ILO, IHI, SCALE, INFO)
DGEBAL
Definition: dgebal.f:162
subroutine dorghr(N, ILO, IHI, A, LDA, TAU, WORK, LWORK, INFO)
DORGHR
Definition: dorghr.f:128
double precision function dlange(NORM, M, N, A, LDA, WORK)
DLANGE returns the value of the 1-norm, Frobenius norm, infinity-norm, or the largest absolute value ...
Definition: dlange.f:116
subroutine dtrsen(JOB, COMPQ, SELECT, N, T, LDT, Q, LDQ, WR, WI, M, S, SEP, WORK, LWORK, IWORK, LIWORK, INFO)
DTRSEN
Definition: dtrsen.f:315
integer function ilaenv(ISPEC, NAME, OPTS, N1, N2, N3, N4)
Definition: tstiee.f:83
subroutine dhseqr(JOB, COMPZ, N, ILO, IHI, H, LDH, WR, WI, Z, LDZ, WORK, LWORK, INFO)
DHSEQR
Definition: dhseqr.f:318
logical function lsame(CA, CB)
LSAME
Definition: lsame.f:55

Here is the call graph for this function:

Here is the caller graph for this function: