LAPACK
3.6.1
LAPACK: Linear Algebra PACKage

program dchkee  (  ) 
DCHKEE
DCHKEE tests the DOUBLE PRECISION LAPACK subroutines for the matrix eigenvalue problem. The test paths in this version are NEP (Nonsymmetric Eigenvalue Problem): Test DGEHRD, DORGHR, DHSEQR, DTREVC, DHSEIN, and DORMHR SEP (Symmetric Eigenvalue Problem): Test DSYTRD, DORGTR, DSTEQR, DSTERF, DSTEIN, DSTEDC, and drivers DSYEV(X), DSBEV(X), DSPEV(X), DSTEV(X), DSYEVD, DSBEVD, DSPEVD, DSTEVD SVD (Singular Value Decomposition): Test DGEBRD, DORGBR, DBDSQR, DBDSDC and the drivers DGESVD, DGESDD DEV (Nonsymmetric Eigenvalue/eigenvector Driver): Test DGEEV DES (Nonsymmetric Schur form Driver): Test DGEES DVX (Nonsymmetric Eigenvalue/eigenvector Expert Driver): Test DGEEVX DSX (Nonsymmetric Schur form Expert Driver): Test DGEESX DGG (Generalized Nonsymmetric Eigenvalue Problem): Test DGGHD3, DGGBAL, DGGBAK, DHGEQZ, and DTGEVC DGS (Generalized Nonsymmetric Schur form Driver): Test DGGES DGV (Generalized Nonsymmetric Eigenvalue/eigenvector Driver): Test DGGEV DGX (Generalized Nonsymmetric Schur form Expert Driver): Test DGGESX DXV (Generalized Nonsymmetric Eigenvalue/eigenvector Expert Driver): Test DGGEVX DSG (Symmetric Generalized Eigenvalue Problem): Test DSYGST, DSYGV, DSYGVD, DSYGVX, DSPGST, DSPGV, DSPGVD, DSPGVX, DSBGST, DSBGV, DSBGVD, and DSBGVX DSB (Symmetric Band Eigenvalue Problem): Test DSBTRD DBB (Band Singular Value Decomposition): Test DGBBRD DEC (Eigencondition estimation): Test DLALN2, DLASY2, DLAEQU, DLAEXC, DTRSYL, DTREXC, DTRSNA, DTRSEN, and DLAQTR DBL (Balancing a general matrix) Test DGEBAL DBK (Back transformation on a balanced matrix) Test DGEBAK DGL (Balancing a matrix pair) Test DGGBAL DGK (Back transformation on a matrix pair) Test DGGBAK GLM (Generalized Linear Regression Model): Tests DGGGLM GQR (Generalized QR and RQ factorizations): Tests DGGQRF and DGGRQF GSV (Generalized Singular Value Decomposition): Tests DGGSVD, DGGSVP, DTGSJA, DLAGS2, DLAPLL, and DLAPMT CSD (CS decomposition): Tests DORCSD LSE (Constrained Linear Least Squares): Tests DGGLSE Each test path has a different set of inputs, but the data sets for the driver routines xEV, xES, xVX, and xSX can be concatenated in a single input file. The first line of input should contain one of the 3character path names in columns 13. The number of remaining lines depends on what is found on the first line. The number of matrix types used in testing is often controllable from the input file. The number of matrix types for each path, and the test routine that describes them, is as follows: Path name(s) Types Test routine DHS or NEP 21 DCHKHS DST or SEP 21 DCHKST (routines) 18 DDRVST (drivers) DBD or SVD 16 DCHKBD (routines) 5 DDRVBD (drivers) DEV 21 DDRVEV DES 21 DDRVES DVX 21 DDRVVX DSX 21 DDRVSX DGG 26 DCHKGG (routines) DGS 26 DDRGES DGX 5 DDRGSX DGV 26 DDRGEV DXV 2 DDRGVX DSG 21 DDRVSG DSB 15 DCHKSB DBB 15 DCHKBB DEC  DCHKEC DBL  DCHKBL DBK  DCHKBK DGL  DCHKGL DGK  DCHKGK GLM 8 DCKGLM GQR 8 DCKGQR GSV 8 DCKGSV CSD 3 DCKCSD LSE 8 DCKLSE  NEP input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NPARMS, INTEGER Number of values of the parameters NB, NBMIN, NX, NS, and MAXB. line 5: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 6: NBMIN, INTEGER array, dimension (NPARMS) The values for the minimum blocksize NBMIN. line 7: NXVAL, INTEGER array, dimension (NPARMS) The values for the crossover point NX. line 8: INMIN, INTEGER array, dimension (NPARMS) LAHQR vs TTQRE crossover point, >= 11 line 9: INWIN, INTEGER array, dimension (NPARMS) recommended deflation window size line 10: INIBL, INTEGER array, dimension (NPARMS) nibble crossover point line 11: ISHFTS, INTEGER array, dimension (NPARMS) number of simultaneous shifts) line 12: IACC22, INTEGER array, dimension (NPARMS) select structured matrix multiply: 0, 1 or 2) line 13: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. To have all of the test ratios printed, use THRESH = 0.0 . line 14: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 14 was 2: line 15: INTEGER array, dimension (4) Four integer values for the random number seed. lines 15EOF: The remaining lines occur in sets of 1 or 2 and allow the user to specify the matrix types. Each line contains a 3character path name in columns 13, and the number of matrix types must be the first nonblank item in columns 480. If the number of matrix types is at least 1 but is less than the maximum number of possible types, a second line will be read to get the numbers of the matrix types to be used. For example, NEP 21 requests all of the matrix types for the nonsymmetric eigenvalue problem, while NEP 4 9 10 11 12 requests only matrices of type 9, 10, 11, and 12. The valid 3character path names are 'NEP' or 'SHS' for the nonsymmetric eigenvalue routines.  SEP or DSG input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NPARMS, INTEGER Number of values of the parameters NB, NBMIN, and NX. line 5: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 6: NBMIN, INTEGER array, dimension (NPARMS) The values for the minimum blocksize NBMIN. line 7: NXVAL, INTEGER array, dimension (NPARMS) The values for the crossover point NX. line 8: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 9: TSTCHK, LOGICAL Flag indicating whether or not to test the LAPACK routines. line 10: TSTDRV, LOGICAL Flag indicating whether or not to test the driver routines. line 11: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 12: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 12 was 2: line 13: INTEGER array, dimension (4) Four integer values for the random number seed. lines 13EOF: Lines specifying matrix types, as for NEP. The 3character path names are 'SEP' or 'SST' for the symmetric eigenvalue routines and driver routines, and 'DSG' for the routines for the symmetric generalized eigenvalue problem.  SVD input file: line 2: NN, INTEGER Number of values of M and N. line 3: MVAL, INTEGER array, dimension (NN) The values for the matrix row dimension M. line 4: NVAL, INTEGER array, dimension (NN) The values for the matrix column dimension N. line 5: NPARMS, INTEGER Number of values of the parameter NB, NBMIN, NX, and NRHS. line 6: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 7: NBMIN, INTEGER array, dimension (NPARMS) The values for the minimum blocksize NBMIN. line 8: NXVAL, INTEGER array, dimension (NPARMS) The values for the crossover point NX. line 9: NSVAL, INTEGER array, dimension (NPARMS) The values for the number of right hand sides NRHS. line 10: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 11: TSTCHK, LOGICAL Flag indicating whether or not to test the LAPACK routines. line 12: TSTDRV, LOGICAL Flag indicating whether or not to test the driver routines. line 13: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 14: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 14 was 2: line 15: INTEGER array, dimension (4) Four integer values for the random number seed. lines 15EOF: Lines specifying matrix types, as for NEP. The 3character path names are 'SVD' or 'SBD' for both the SVD routines and the SVD driver routines.  DEV and DES data files: line 1: 'DEV' or 'DES' in columns 1 to 3. line 2: NSIZES, INTEGER Number of sizes of matrices to use. Should be at least 0 and at most 20. If NSIZES = 0, no testing is done (although the remaining 3 lines are still read). line 3: NN, INTEGER array, dimension(NSIZES) Dimensions of matrices to be tested. line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHSEQR NBCOL : minimum column dimension for blocking line 5: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. If it is 0., all test case data will be printed. line 6: TSTERR, LOGICAL Flag indicating whether or not to test the error exits. line 7: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 7 was 2: line 8: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9 and following: Lines specifying matrix types, as for NEP. The 3character path name is 'DEV' to test SGEEV, or 'DES' to test SGEES.  The DVX data has two parts. The first part is identical to DEV, and the second part consists of test matrices with precomputed solutions. line 1: 'DVX' in columns 13. line 2: NSIZES, INTEGER If NSIZES = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. line 3: NN, INTEGER array, dimension(NSIZES) line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs line 5: THRESH, REAL line 6: TSTERR, LOGICAL line 7: NEWSD, INTEGER If line 7 was 2: line 8: INTEGER array, dimension (4) lines 9 and following: The first line contains 'DVX' in columns 13 followed by the number of matrix types, possibly with a second line to specify certain matrix types. If the number of matrix types = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. remaining lines : Each matrix is stored on 1+2*N lines, where N is its dimension. The first line contains the dimension (a single integer). The next N lines contain the matrix, one row per line. The last N lines correspond to each eigenvalue. Each of these last N lines contains 4 real values: the real part of the eigenvalue, the imaginary part of the eigenvalue, the reciprocal condition number of the eigenvalues, and the reciprocal condition number of the eigenvector. The end of data is indicated by dimension N=0. Even if no data is to be tested, there must be at least one line containing N=0.  The DSX data is like DVX. The first part is identical to DEV, and the second part consists of test matrices with precomputed solutions. line 1: 'DSX' in columns 13. line 2: NSIZES, INTEGER If NSIZES = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. line 3: NN, INTEGER array, dimension(NSIZES) line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs line 5: THRESH, REAL line 6: TSTERR, LOGICAL line 7: NEWSD, INTEGER If line 7 was 2: line 8: INTEGER array, dimension (4) lines 9 and following: The first line contains 'DSX' in columns 13 followed by the number of matrix types, possibly with a second line to specify certain matrix types. If the number of matrix types = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. remaining lines : Each matrix is stored on 3+N lines, where N is its dimension. The first line contains the dimension N and the dimension M of an invariant subspace. The second line contains M integers, identifying the eigenvalues in the invariant subspace (by their position in a list of eigenvalues ordered by increasing real part). The next N lines contain the matrix. The last line contains the reciprocal condition number for the average of the selected eigenvalues, and the reciprocal condition number for the corresponding right invariant subspace. The end of data is indicated by a line containing N=0 and M=0. Even if no data is to be tested, there must be at least one line containing N=0 and M=0.  DGG input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NPARMS, INTEGER Number of values of the parameters NB, NBMIN, NS, MAXB, and NBCOL. line 5: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 6: NBMIN, INTEGER array, dimension (NPARMS) The values for NBMIN, the minimum row dimension for blocks. line 7: NSVAL, INTEGER array, dimension (NPARMS) The values for the number of shifts. line 8: MXBVAL, INTEGER array, dimension (NPARMS) The values for MAXB, used in determining minimum blocksize. line 9: IACC22, INTEGER array, dimension (NPARMS) select structured matrix multiply: 1 or 2) line 10: NBCOL, INTEGER array, dimension (NPARMS) The values for NBCOL, the minimum column dimension for blocks. line 11: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 12: TSTCHK, LOGICAL Flag indicating whether or not to test the LAPACK routines. line 13: TSTDRV, LOGICAL Flag indicating whether or not to test the driver routines. line 14: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 15: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 15 was 2: line 16: INTEGER array, dimension (4) Four integer values for the random number seed. lines 17EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'DGG' for the generalized eigenvalue problem routines and driver routines.  DGS and DGV input files: line 1: 'DGS' or 'DGV' in columns 1 to 3. line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension(NN) Dimensions of matrices to be tested. line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHGEQR NBCOL : minimum column dimension for blocking line 5: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. If it is 0., all test case data will be printed. line 6: TSTERR, LOGICAL Flag indicating whether or not to test the error exits. line 7: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 17 was 2: line 7: INTEGER array, dimension (4) Four integer values for the random number seed. lines 7EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'DGS' for the generalized eigenvalue problem routines and driver routines.  DXV input files: line 1: 'DXV' in columns 1 to 3. line 2: N, INTEGER Value of N. line 3: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHGEQR NBCOL : minimum column dimension for blocking line 4: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 5: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 6: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 6 was 2: line 7: INTEGER array, dimension (4) Four integer values for the random number seed. If line 2 was 0: line 7EOF: Precomputed examples are tested. remaining lines : Each example is stored on 3+2*N lines, where N is its dimension. The first line contains the dimension (a single integer). The next N lines contain the matrix A, one row per line. The next N lines contain the matrix B. The next line contains the reciprocals of the eigenvalue condition numbers. The last line contains the reciprocals of the eigenvector condition numbers. The end of data is indicated by dimension N=0. Even if no data is to be tested, there must be at least one line containing N=0.  DGX input files: line 1: 'DGX' in columns 1 to 3. line 2: N, INTEGER Value of N. line 3: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHGEQR NBCOL : minimum column dimension for blocking line 4: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 5: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 6: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 6 was 2: line 7: INTEGER array, dimension (4) Four integer values for the random number seed. If line 2 was 0: line 7EOF: Precomputed examples are tested. remaining lines : Each example is stored on 3+2*N lines, where N is its dimension. The first line contains the dimension (a single integer). The next line contains an integer k such that only the last k eigenvalues will be selected and appear in the leading diagonal blocks of $A$ and $B$. The next N lines contain the matrix A, one row per line. The next N lines contain the matrix B. The last line contains the reciprocal of the eigenvalue cluster condition number and the reciprocal of the deflating subspace (associated with the selected eigencluster) condition number. The end of data is indicated by dimension N=0. Even if no data is to be tested, there must be at least one line containing N=0.  DSB input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NK, INTEGER Number of values of K. line 5: KVAL, INTEGER array, dimension (NK) The values for the matrix dimension K. line 6: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 7 was 2: line 8: INTEGER array, dimension (4) Four integer values for the random number seed. lines 8EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'DSB'.  DBB input file: line 2: NN, INTEGER Number of values of M and N. line 3: MVAL, INTEGER array, dimension (NN) The values for the matrix row dimension M. line 4: NVAL, INTEGER array, dimension (NN) The values for the matrix column dimension N. line 4: NK, INTEGER Number of values of K. line 5: KVAL, INTEGER array, dimension (NK) The values for the matrix bandwidth K. line 6: NPARMS, INTEGER Number of values of the parameter NRHS line 7: NSVAL, INTEGER array, dimension (NPARMS) The values for the number of right hand sides NRHS. line 8: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 9: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 9 was 2: line 10: INTEGER array, dimension (4) Four integer values for the random number seed. lines 10EOF: Lines specifying matrix types, as for SVD. The 3character path name is 'DBB'.  DEC input file: line 2: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. lines 3EOF: Input for testing the eigencondition routines consists of a set of specially constructed test cases and their solutions. The data format is not intended to be modified by the user.  DBL and DBK input files: line 1: 'DBL' in columns 13 to test SGEBAL, or 'DBK' in columns 13 to test SGEBAK. The remaining lines consist of specially constructed test cases.  DGL and DGK input files: line 1: 'DGL' in columns 13 to test DGGBAL, or 'DGK' in columns 13 to test DGGBAK. The remaining lines consist of specially constructed test cases.  GLM data file: line 1: 'GLM' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M (row dimension). line 4: PVAL, INTEGER array, dimension(NN) Values of P (row dimension). line 5: NVAL, INTEGER array, dimension(NN) Values of N (column dimension), note M <= N <= M+P. line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'GLM' for the generalized linear regression model routines.  GQR data file: line 1: 'GQR' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M. line 4: PVAL, INTEGER array, dimension(NN) Values of P. line 5: NVAL, INTEGER array, dimension(NN) Values of N. line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'GQR' for the generalized QR and RQ routines.  GSV data file: line 1: 'GSV' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M (row dimension). line 4: PVAL, INTEGER array, dimension(NN) Values of P (row dimension). line 5: NVAL, INTEGER array, dimension(NN) Values of N (column dimension). line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'GSV' for the generalized SVD routines.  CSD data file: line 1: 'CSD' in columns 1 to 3. line 2: NM, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NM) Values of M (row and column dimension of orthogonal matrix). line 4: PVAL, INTEGER array, dimension(NM) Values of P (row dimension of topleft block). line 5: NVAL, INTEGER array, dimension(NM) Values of N (column dimension of topleft block). line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'CSD' for the CSD routine.  LSE data file: line 1: 'LSE' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M. line 4: PVAL, INTEGER array, dimension(NN) Values of P. line 5: NVAL, INTEGER array, dimension(NN) Values of N, note P <= N <= P+M. line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9EOF: Lines specifying matrix types, as for NEP. The 3character path name is 'GSV' for the generalized SVD routines.  NMAX is currently set to 132 and must be at least 12 for some of the precomputed examples, and LWORK = NMAX*(5*NMAX+5)+1 in the parameter statements below. For SVD, we assume NRHS may be as big as N. The parameter NEED is set to 14 to allow for 14 NbyN matrices for DGG.
Definition at line 1041 of file dchkee.f.