#include "blaswrap.h"
#include "f2c.h"

/* Subroutine */ int zgegs_(char *jobvsl, char *jobvsr, integer *n, 
	doublecomplex *a, integer *lda, doublecomplex *b, integer *ldb, 
	doublecomplex *alpha, doublecomplex *beta, doublecomplex *vsl, 
	integer *ldvsl, doublecomplex *vsr, integer *ldvsr, doublecomplex *
	work, integer *lwork, doublereal *rwork, integer *info)
{
/*  -- LAPACK driver routine (version 3.0) --   
       Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,   
       Courant Institute, Argonne National Lab, and Rice University   
       June 30, 1999   


    Purpose   
    =======   

    This routine is deprecated and has been replaced by routine ZGGES.   

    ZGEGS computes for a pair of N-by-N complex nonsymmetric matrices A,   
    B:  the generalized eigenvalues (alpha, beta), the complex Schur   
    form (A, B), and optionally left and/or right Schur vectors   
    (VSL and VSR).   

    (If only the generalized eigenvalues are needed, use the driver ZGEGV   
    instead.)   

    A generalized eigenvalue for a pair of matrices (A,B) is, roughly   
    speaking, a scalar w or a ratio  alpha/beta = w, such that  A - w*B   
    is singular.  It is usually represented as the pair (alpha,beta),   
    as there is a reasonable interpretation for beta=0, and even for   
    both being zero.  A good beginning reference is the book, "Matrix   
    Computations", by G. Golub & C. van Loan (Johns Hopkins U. Press)   

    The (generalized) Schur form of a pair of matrices is the result of   
    multiplying both matrices on the left by one unitary matrix and   
    both on the right by another unitary matrix, these two unitary   
    matrices being chosen so as to bring the pair of matrices into   
    upper triangular form with the diagonal elements of B being   
    non-negative real numbers (this is also called complex Schur form.)   

    The left and right Schur vectors are the columns of VSL and VSR,   
    respectively, where VSL and VSR are the unitary matrices   
    which reduce A and B to Schur form:   

    Schur form of (A,B) = ( (VSL)**H A (VSR), (VSL)**H B (VSR) )   

    Arguments   
    =========   

    JOBVSL   (input) CHARACTER*1   
            = 'N':  do not compute the left Schur vectors;   
            = 'V':  compute the left Schur vectors.   

    JOBVSR   (input) CHARACTER*1   
            = 'N':  do not compute the right Schur vectors;   
            = 'V':  compute the right Schur vectors.   

    N       (input) INTEGER   
            The order of the matrices A, B, VSL, and VSR.  N >= 0.   

    A       (input/output) COMPLEX*16 array, dimension (LDA, N)   
            On entry, the first of the pair of matrices whose generalized   
            eigenvalues and (optionally) Schur vectors are to be   
            computed.   
            On exit, the generalized Schur form of A.   

    LDA     (input) INTEGER   
            The leading dimension of A.  LDA >= max(1,N).   

    B       (input/output) COMPLEX*16 array, dimension (LDB, N)   
            On entry, the second of the pair of matrices whose   
            generalized eigenvalues and (optionally) Schur vectors are   
            to be computed.   
            On exit, the generalized Schur form of B.   

    LDB     (input) INTEGER   
            The leading dimension of B.  LDB >= max(1,N).   

    ALPHA   (output) COMPLEX*16 array, dimension (N)   
    BETA    (output) COMPLEX*16 array, dimension (N)   
            On exit,  ALPHA(j)/BETA(j), j=1,...,N, will be the   
            generalized eigenvalues.  ALPHA(j), j=1,...,N  and  BETA(j),   
            j=1,...,N  are the diagonals of the complex Schur form (A,B)   
            output by ZGEGS.  The  BETA(j) will be non-negative real.   

            Note: the quotients ALPHA(j)/BETA(j) may easily over- or   
            underflow, and BETA(j) may even be zero.  Thus, the user   
            should avoid naively computing the ratio alpha/beta.   
            However, ALPHA will be always less than and usually   
            comparable with norm(A) in magnitude, and BETA always less   
            than and usually comparable with norm(B).   

    VSL     (output) COMPLEX*16 array, dimension (LDVSL,N)   
            If JOBVSL = 'V', VSL will contain the left Schur vectors.   
            (See "Purpose", above.)   
            Not referenced if JOBVSL = 'N'.   

    LDVSL   (input) INTEGER   
            The leading dimension of the matrix VSL. LDVSL >= 1, and   
            if JOBVSL = 'V', LDVSL >= N.   

    VSR     (output) COMPLEX*16 array, dimension (LDVSR,N)   
            If JOBVSR = 'V', VSR will contain the right Schur vectors.   
            (See "Purpose", above.)   
            Not referenced if JOBVSR = 'N'.   

    LDVSR   (input) INTEGER   
            The leading dimension of the matrix VSR. LDVSR >= 1, and   
            if JOBVSR = 'V', LDVSR >= N.   

    WORK    (workspace/output) COMPLEX*16 array, dimension (LWORK)   
            On exit, if INFO = 0, WORK(1) returns the optimal LWORK.   

    LWORK   (input) INTEGER   
            The dimension of the array WORK.  LWORK >= max(1,2*N).   
            For good performance, LWORK must generally be larger.   
            To compute the optimal value of LWORK, call ILAENV to get   
            blocksizes (for ZGEQRF, ZUNMQR, and CUNGQR.)  Then compute:   
            NB  -- MAX of the blocksizes for ZGEQRF, ZUNMQR, and CUNGQR;   
            the optimal LWORK is N*(NB+1).   

            If LWORK = -1, then a workspace query is assumed; the routine   
            only calculates the optimal size of the WORK array, returns   
            this value as the first entry of the WORK array, and no error   
            message related to LWORK is issued by XERBLA.   

    RWORK   (workspace) DOUBLE PRECISION array, dimension (3*N)   

    INFO    (output) INTEGER   
            = 0:  successful exit   
            < 0:  if INFO = -i, the i-th argument had an illegal value.   
            =1,...,N:   
                  The QZ iteration failed.  (A,B) are not in Schur   
                  form, but ALPHA(j) and BETA(j) should be correct for   
                  j=INFO+1,...,N.   
            > N:  errors that usually indicate LAPACK problems:   
                  =N+1: error return from ZGGBAL   
                  =N+2: error return from ZGEQRF   
                  =N+3: error return from ZUNMQR   
                  =N+4: error return from ZUNGQR   
                  =N+5: error return from ZGGHRD   
                  =N+6: error return from ZHGEQZ (other than failed   
                                                 iteration)   
                  =N+7: error return from ZGGBAK (computing VSL)   
                  =N+8: error return from ZGGBAK (computing VSR)   
                  =N+9: error return from ZLASCL (various places)   

    =====================================================================   


       Decode the input arguments   

       Parameter adjustments */
    /* Table of constant values */
    static doublecomplex c_b1 = {0.,0.};
    static doublecomplex c_b2 = {1.,0.};
    static integer c__1 = 1;
    static integer c_n1 = -1;
    
    /* System generated locals */
    integer a_dim1, a_offset, b_dim1, b_offset, vsl_dim1, vsl_offset, 
	    vsr_dim1, vsr_offset, i__1, i__2, i__3;
    /* Local variables */
    static doublereal anrm, bnrm;
    static integer itau, lopt;
    extern logical lsame_(char *, char *);
    static integer ileft, iinfo, icols;
    static logical ilvsl;
    static integer iwork;
    static logical ilvsr;
    static integer irows, nb;
    extern doublereal dlamch_(char *);
    extern /* Subroutine */ int zggbak_(char *, char *, integer *, integer *, 
	    integer *, doublereal *, doublereal *, integer *, doublecomplex *,
	     integer *, integer *), zggbal_(char *, integer *,
	     doublecomplex *, integer *, doublecomplex *, integer *, integer *
	    , integer *, doublereal *, doublereal *, doublereal *, integer *);
    static logical ilascl, ilbscl;
    static doublereal safmin;
    extern /* Subroutine */ int xerbla_(char *, integer *);
    extern integer ilaenv_(integer *, char *, char *, integer *, integer *, 
	    integer *, integer *, ftnlen, ftnlen);
    extern doublereal zlange_(char *, integer *, integer *, doublecomplex *, 
	    integer *, doublereal *);
    static doublereal bignum;
    static integer ijobvl, iright;
    extern /* Subroutine */ int zgghrd_(char *, char *, integer *, integer *, 
	    integer *, doublecomplex *, integer *, doublecomplex *, integer *,
	     doublecomplex *, integer *, doublecomplex *, integer *, integer *
	    ), zlascl_(char *, integer *, integer *, 
	    doublereal *, doublereal *, integer *, integer *, doublecomplex *,
	     integer *, integer *);
    static integer ijobvr;
    extern /* Subroutine */ int zgeqrf_(integer *, integer *, doublecomplex *,
	     integer *, doublecomplex *, doublecomplex *, integer *, integer *
	    );
    static doublereal anrmto;
    static integer lwkmin, nb1, nb2, nb3;
    static doublereal bnrmto;
    extern /* Subroutine */ int zlacpy_(char *, integer *, integer *, 
	    doublecomplex *, integer *, doublecomplex *, integer *), 
	    zhgeqz_(char *, char *, char *, integer *, integer *, integer *, 
	    doublecomplex *, integer *, doublecomplex *, integer *, 
	    doublecomplex *, doublecomplex *, doublecomplex *, integer *, 
	    doublecomplex *, integer *, doublecomplex *, integer *, 
	    doublereal *, integer *), zlaset_(char *, 
	    integer *, integer *, doublecomplex *, doublecomplex *, 
	    doublecomplex *, integer *);
    static doublereal smlnum;
    static integer irwork, lwkopt;
    static logical lquery;
    extern /* Subroutine */ int zungqr_(integer *, integer *, integer *, 
	    doublecomplex *, integer *, doublecomplex *, doublecomplex *, 
	    integer *, integer *), zunmqr_(char *, char *, integer *, integer 
	    *, integer *, doublecomplex *, integer *, doublecomplex *, 
	    doublecomplex *, integer *, doublecomplex *, integer *, integer *);
    static integer ihi, ilo;
    static doublereal eps;
#define a_subscr(a_1,a_2) (a_2)*a_dim1 + a_1
#define a_ref(a_1,a_2) a[a_subscr(a_1,a_2)]
#define b_subscr(a_1,a_2) (a_2)*b_dim1 + a_1
#define b_ref(a_1,a_2) b[b_subscr(a_1,a_2)]
#define vsl_subscr(a_1,a_2) (a_2)*vsl_dim1 + a_1
#define vsl_ref(a_1,a_2) vsl[vsl_subscr(a_1,a_2)]


    a_dim1 = *lda;
    a_offset = 1 + a_dim1 * 1;
    a -= a_offset;
    b_dim1 = *ldb;
    b_offset = 1 + b_dim1 * 1;
    b -= b_offset;
    --alpha;
    --beta;
    vsl_dim1 = *ldvsl;
    vsl_offset = 1 + vsl_dim1 * 1;
    vsl -= vsl_offset;
    vsr_dim1 = *ldvsr;
    vsr_offset = 1 + vsr_dim1 * 1;
    vsr -= vsr_offset;
    --work;
    --rwork;

    /* Function Body */
    if (lsame_(jobvsl, "N")) {
	ijobvl = 1;
	ilvsl = FALSE_;
    } else if (lsame_(jobvsl, "V")) {
	ijobvl = 2;
	ilvsl = TRUE_;
    } else {
	ijobvl = -1;
	ilvsl = FALSE_;
    }

    if (lsame_(jobvsr, "N")) {
	ijobvr = 1;
	ilvsr = FALSE_;
    } else if (lsame_(jobvsr, "V")) {
	ijobvr = 2;
	ilvsr = TRUE_;
    } else {
	ijobvr = -1;
	ilvsr = FALSE_;
    }

/*     Test the input arguments   

   Computing MAX */
    i__1 = *n << 1;
    lwkmin = max(i__1,1);
    lwkopt = lwkmin;
    work[1].r = (doublereal) lwkopt, work[1].i = 0.;
    lquery = *lwork == -1;
    *info = 0;
    if (ijobvl <= 0) {
	*info = -1;
    } else if (ijobvr <= 0) {
	*info = -2;
    } else if (*n < 0) {
	*info = -3;
    } else if (*lda < max(1,*n)) {
	*info = -5;
    } else if (*ldb < max(1,*n)) {
	*info = -7;
    } else if (*ldvsl < 1 || ilvsl && *ldvsl < *n) {
	*info = -11;
    } else if (*ldvsr < 1 || ilvsr && *ldvsr < *n) {
	*info = -13;
    } else if (*lwork < lwkmin && ! lquery) {
	*info = -15;
    }

    if (*info == 0) {
	nb1 = ilaenv_(&c__1, "ZGEQRF", " ", n, n, &c_n1, &c_n1, (ftnlen)6, (
		ftnlen)1);
	nb2 = ilaenv_(&c__1, "ZUNMQR", " ", n, n, n, &c_n1, (ftnlen)6, (
		ftnlen)1);
	nb3 = ilaenv_(&c__1, "ZUNGQR", " ", n, n, n, &c_n1, (ftnlen)6, (
		ftnlen)1);
/* Computing MAX */
	i__1 = max(nb1,nb2);
	nb = max(i__1,nb3);
	lopt = *n * (nb + 1);
	work[1].r = (doublereal) lopt, work[1].i = 0.;
    }

    if (*info != 0) {
	i__1 = -(*info);
	xerbla_("ZGEGS ", &i__1);
	return 0;
    } else if (lquery) {
	return 0;
    }

/*     Quick return if possible */

    if (*n == 0) {
	return 0;
    }

/*     Get machine constants */

    eps = dlamch_("E") * dlamch_("B");
    safmin = dlamch_("S");
    smlnum = *n * safmin / eps;
    bignum = 1. / smlnum;

/*     Scale A if max element outside range [SMLNUM,BIGNUM] */

    anrm = zlange_("M", n, n, &a[a_offset], lda, &rwork[1]);
    ilascl = FALSE_;
    if (anrm > 0. && anrm < smlnum) {
	anrmto = smlnum;
	ilascl = TRUE_;
    } else if (anrm > bignum) {
	anrmto = bignum;
	ilascl = TRUE_;
    }

    if (ilascl) {
	zlascl_("G", &c_n1, &c_n1, &anrm, &anrmto, n, n, &a[a_offset], lda, &
		iinfo);
	if (iinfo != 0) {
	    *info = *n + 9;
	    return 0;
	}
    }

/*     Scale B if max element outside range [SMLNUM,BIGNUM] */

    bnrm = zlange_("M", n, n, &b[b_offset], ldb, &rwork[1]);
    ilbscl = FALSE_;
    if (bnrm > 0. && bnrm < smlnum) {
	bnrmto = smlnum;
	ilbscl = TRUE_;
    } else if (bnrm > bignum) {
	bnrmto = bignum;
	ilbscl = TRUE_;
    }

    if (ilbscl) {
	zlascl_("G", &c_n1, &c_n1, &bnrm, &bnrmto, n, n, &b[b_offset], ldb, &
		iinfo);
	if (iinfo != 0) {
	    *info = *n + 9;
	    return 0;
	}
    }

/*     Permute the matrix to make it more nearly triangular */

    ileft = 1;
    iright = *n + 1;
    irwork = iright + *n;
    iwork = 1;
    zggbal_("P", n, &a[a_offset], lda, &b[b_offset], ldb, &ilo, &ihi, &rwork[
	    ileft], &rwork[iright], &rwork[irwork], &iinfo);
    if (iinfo != 0) {
	*info = *n + 1;
	goto L10;
    }

/*     Reduce B to triangular form, and initialize VSL and/or VSR */

    irows = ihi + 1 - ilo;
    icols = *n + 1 - ilo;
    itau = iwork;
    iwork = itau + irows;
    i__1 = *lwork + 1 - iwork;
    zgeqrf_(&irows, &icols, &b_ref(ilo, ilo), ldb, &work[itau], &work[iwork], 
	    &i__1, &iinfo);
    if (iinfo >= 0) {
/* Computing MAX */
	i__3 = iwork;
	i__1 = lwkopt, i__2 = (integer) work[i__3].r + iwork - 1;
	lwkopt = max(i__1,i__2);
    }
    if (iinfo != 0) {
	*info = *n + 2;
	goto L10;
    }

    i__1 = *lwork + 1 - iwork;
    zunmqr_("L", "C", &irows, &icols, &irows, &b_ref(ilo, ilo), ldb, &work[
	    itau], &a_ref(ilo, ilo), lda, &work[iwork], &i__1, &iinfo);
    if (iinfo >= 0) {
/* Computing MAX */
	i__3 = iwork;
	i__1 = lwkopt, i__2 = (integer) work[i__3].r + iwork - 1;
	lwkopt = max(i__1,i__2);
    }
    if (iinfo != 0) {
	*info = *n + 3;
	goto L10;
    }

    if (ilvsl) {
	zlaset_("Full", n, n, &c_b1, &c_b2, &vsl[vsl_offset], ldvsl);
	i__1 = irows - 1;
	i__2 = irows - 1;
	zlacpy_("L", &i__1, &i__2, &b_ref(ilo + 1, ilo), ldb, &vsl_ref(ilo + 
		1, ilo), ldvsl);
	i__1 = *lwork + 1 - iwork;
	zungqr_(&irows, &irows, &irows, &vsl_ref(ilo, ilo), ldvsl, &work[itau]
		, &work[iwork], &i__1, &iinfo);
	if (iinfo >= 0) {
/* Computing MAX */
	    i__3 = iwork;
	    i__1 = lwkopt, i__2 = (integer) work[i__3].r + iwork - 1;
	    lwkopt = max(i__1,i__2);
	}
	if (iinfo != 0) {
	    *info = *n + 4;
	    goto L10;
	}
    }

    if (ilvsr) {
	zlaset_("Full", n, n, &c_b1, &c_b2, &vsr[vsr_offset], ldvsr);
    }

/*     Reduce to generalized Hessenberg form */

    zgghrd_(jobvsl, jobvsr, n, &ilo, &ihi, &a[a_offset], lda, &b[b_offset], 
	    ldb, &vsl[vsl_offset], ldvsl, &vsr[vsr_offset], ldvsr, &iinfo);
    if (iinfo != 0) {
	*info = *n + 5;
	goto L10;
    }

/*     Perform QZ algorithm, computing Schur vectors if desired */

    iwork = itau;
    i__1 = *lwork + 1 - iwork;
    zhgeqz_("S", jobvsl, jobvsr, n, &ilo, &ihi, &a[a_offset], lda, &b[
	    b_offset], ldb, &alpha[1], &beta[1], &vsl[vsl_offset], ldvsl, &
	    vsr[vsr_offset], ldvsr, &work[iwork], &i__1, &rwork[irwork], &
	    iinfo);
    if (iinfo >= 0) {
/* Computing MAX */
	i__3 = iwork;
	i__1 = lwkopt, i__2 = (integer) work[i__3].r + iwork - 1;
	lwkopt = max(i__1,i__2);
    }
    if (iinfo != 0) {
	if (iinfo > 0 && iinfo <= *n) {
	    *info = iinfo;
	} else if (iinfo > *n && iinfo <= *n << 1) {
	    *info = iinfo - *n;
	} else {
	    *info = *n + 6;
	}
	goto L10;
    }

/*     Apply permutation to VSL and VSR */

    if (ilvsl) {
	zggbak_("P", "L", n, &ilo, &ihi, &rwork[ileft], &rwork[iright], n, &
		vsl[vsl_offset], ldvsl, &iinfo);
	if (iinfo != 0) {
	    *info = *n + 7;
	    goto L10;
	}
    }
    if (ilvsr) {
	zggbak_("P", "R", n, &ilo, &ihi, &rwork[ileft], &rwork[iright], n, &
		vsr[vsr_offset], ldvsr, &iinfo);
	if (iinfo != 0) {
	    *info = *n + 8;
	    goto L10;
	}
    }

/*     Undo scaling */

    if (ilascl) {
	zlascl_("U", &c_n1, &c_n1, &anrmto, &anrm, n, n, &a[a_offset], lda, &
		iinfo);
	if (iinfo != 0) {
	    *info = *n + 9;
	    return 0;
	}
	zlascl_("G", &c_n1, &c_n1, &anrmto, &anrm, n, &c__1, &alpha[1], n, &
		iinfo);
	if (iinfo != 0) {
	    *info = *n + 9;
	    return 0;
	}
    }

    if (ilbscl) {
	zlascl_("U", &c_n1, &c_n1, &bnrmto, &bnrm, n, n, &b[b_offset], ldb, &
		iinfo);
	if (iinfo != 0) {
	    *info = *n + 9;
	    return 0;
	}
	zlascl_("G", &c_n1, &c_n1, &bnrmto, &bnrm, n, &c__1, &beta[1], n, &
		iinfo);
	if (iinfo != 0) {
	    *info = *n + 9;
	    return 0;
	}
    }

L10:
    work[1].r = (doublereal) lwkopt, work[1].i = 0.;

    return 0;

/*     End of ZGEGS */

} /* zgegs_ */

#undef vsl_ref
#undef vsl_subscr
#undef b_ref
#undef b_subscr
#undef a_ref
#undef a_subscr